Help? Error - Kenwood DDX8046BT Instruction Manual

Help? Error

"Update your iPod" :
The iPod's software is an older version which
the unit can not support.
➡ Confirm that the software for the iPod is the
latest version. Refer to <iPod/iPhone that
can be connected to this unit> (page 7).
"You only can connect one iPod." :
More than one iPod are connected to this unit.
➡ Connect only one iPod to the USB terminal
with iPod tag.
"Update your USB database" :
The USB device is different from the previous
one or the contained audio files are replaced.
➡ Update your database. Refer to <Source
Control Screen> (page 26) of USB Device
Control.
"Navigation Error. Please turn on power
again later." (DNX series only) :
The communication error has occurred due to
severely cold temperature.
➡ Turn on power again after warming your car
interior.
"No Navigation" (DDX series only):
This unit does not support the connected
navigation unit.
➡ The latest information on the connectable
navigation unit can be obtained from
http://www.kenwood.com/cs/ce.
No navigation unit is connected.
➡ Connect a supported navigation unit.
"CHECK SIRIUS" :
The unit cannot recognize the connected
SIRIUS Tuner Box.
➡ Check the connection of the SIRIUS Tuner
Box.
"ANTENNA ERROR" :
Something is wrong with the antenna.
➡ Check the connection of the antenna.
"ACQUIRING SIGNAL" :
The unit cannot receive any signal.
➡ Move the vehicle to the area where the unit
can receive signal.
118 DNX series DNX9960/ DNX7160/ DNX7020EX
"FIRMWARE UPDATING" :
Updating the firmware of SIRIUS tuner.
➡ Operation is invalid until the update is
completed.
"CHANNELS UPDATING **% COMPLETE" :
Updating the SIRIUS Channel Map.
➡ Operation is invalid until the update is
completed.
"SUBSCRIPTION UPDATED" :
Updating the subscription information.
➡ Operation is invalid until the update is
completed.
"INVALID CHANNEL" :
The selected channel is invalid.
➡ Select a different channel.
"CALL 888-539-SIRIUS TO SUBSCRIBE" :
The selected channel is not subscribed.
➡ Call the displayed number for subscription.
"Check XM Tuner" :
The unit cannot recognize the connected XM
Tuner.
➡ Check the connection of the XM Tuner.
"No Signal" :
The unit cannot receive any signal.
➡ Check the connection of the antenna.
"Check Antenna" :
Something is wrong with the antenna.
➡ Check the connection of the antenna.
"Ch Unavailable" :
The selected channel is invalid.
➡ Select a different channel.
"Ch Unauthorized" :
The selected channel is not subscribed.
"Channel Off Air" :
The broadcast of the selected channel has
finished.