Table of Contents
Advertisement
the "Down" arrow to go back You may press and
hold either arrow down to rapidly advance the time
in the display. The time will advance or go back in
10-minute intervals.
3
Once you have set the time, press START/RESET.
The red light will come on to indicate that the
TIMER has been set and the countdown will begin.
The TIMER will count down in one-minute intervals.
When the TIMER reaches the end of the countdown,
your bread is complete and the display will clear.
The red light will begin flashing to show the
Breadmaker has automatically activated the 60-
minute "Keep Warm" function.
4
If you make a mistake while setting the TIMER,
press and hold the START/RESET button until it
beeps. This will clear the display and you can set the
TIMER again.
Troubleshooting
Specific questions about the breadmaker functions
and problems with ingredients or recipes are
addressed in the "Need Help?" section beginning on
pg.
33.
•
If there is an operational problem with the
unit, you may see a hyphen sign, colon and
a double hyphen sign (-:--) message in the
display window. This means there is an op-
erational/mechanical
malfunction. DO
NOT USE THE UNIT.
Unplug the unit and
contact your local service center for repair.
Call the toll-free number on the cover of this
booklet to ask for the location of the Black
& Decker service center nearest you.
• If the word "HOT" appears in the display
window, it indicates that the unit has not cooled
sufficiently after baking to use immediately
again. Open the lid, remove the Baking Pan and
allow the inside of the unit to cool. When the
error message disappears, you may replace the
Baking Pan and press START/RESET to begin
programming again.
• For specific problems with Bread/Dough results,
see the Troubleshooting guide on the next page:
Hide quick links:
Advertisement
Table of Contents
