›
To refit the rear light assembly, first insert screw
bodywork
» Fig.
162.
›
Carefully press the tail light assembly into the bodywork so that the bolts
latch with the mounts in the body.
›
Hold the rear light assembly still with one hand and attach and tighten the
nuts
» Fig. 162
- with the other hand.
Replacing the bulbs in the tail lamp assembly
›
To replace the bulb, turn the bulb holder anti-clockwise to the stop and re-
move it from the housing
» Fig.
›
Replace the bulb, insert the holder with the bulb into the housing and turn in
a clockwise direction to the the stop.
Note
For slackening and tightening the plastic nut use a coin or similar object.
into the opening in the
A
163.
B
175
Fuses and light bulbs