Sony STR-DG720 Operating Instructions Manual page 8

Name
[l]
DTS/
DTS-ES/
DTS 96/24
lID
CAT
[ill
MEMORY
11m
Tuner
indicators
lIT]
Preset
station
indicators
[12]
D.RANGE
~ NEO:6
[H] COAX
[1§]
HDMI
8 US
Function
HDTS" lights up when the
receiver is decoding DTS
signals.
"DTS-ES" lights up when the
recei ver is decoding DTS- ES
signals.
"DTS 96/24" lights up when
the receiver is decoding DTS
96/24 (96 kHz/24 bit) signals.
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is set to
"AUTO" (page 75).
Lights up when category mode
is set to "ONE CAT" during
XM Radio operation (page 65).
Lights up when a memory
function, such as Preset
Memory (page 59), etc., is
activated.
Lights up when using the
receiver to tune in radio
stations (page 57), etc.
Lights up when using the
receiver to tune in radio
stations you have preset. For
details on presetting radio
stations, see page 58.
Lights up when dynamic range
compression is activated (page
38).
Lights up when DTS Neo:6
Cinema/Music decoder is
activated (page 52).
Lights up when INPUT MODE
is set to "AUTO" and the
source signal is a digital signal
being input through the
COAXIAL jack (page 75).
Lights up when the receiver
recognizes a component
connected via an HDMI IN
jack (page 20).
Name
[§]
Playback
channel
indicators
L
R
C
SL
SR
5
SBL
SBR
SB
Function
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound (based on the speaker
settings).
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Surround Back Left
Surround Back Right
Surround Back (the surround
back components obtained by
6. I channel decoding)
Example:
Recording format (Front!
Surround): 312.1
Output channel: When
surround speakers are set to
"NO" (page 40)
Sound Field: A.F.D. AUTO
~
OJ[CJ[RJ
SL SR