Parallel Remote - Denon Professional DN-V750 Operating Instructions Manual

12 PARALLEL REMOTE

An external controller can be connected to the DN-V750/V755 for parallel remote control.
2 Specifications
Connector type : D-sub female 15 pins
Pin layout
Pin
Input/
no. Name
Output
* 1
q
search 1/6 Input
w
search 2/7 Input
e
search 3/8 Input
r
search 4/9 Input
t
search 5/10 Input
y
select Input
7 shift Input
8 play Input
Power
9 GND
Supply
10 stop Input
!1
9/repeat Input
!2
Input
8/single
13 AUX1 Output
14 AUX2 Output
Power
15 +5V
Supply
1 Circled numbers : The function of the key changes when the key is pressed while pressing the shift button.
2 TTL level (pull-up resistor included)
3 Press and hold in the stop button (for at least 2 seconds) to stop script playback.
4 Maximum output current at low level : 64 mA
(NOTE 1) ; Make sure the power consumption of the external device supplied by this pin is 200 mA or less.
Level
Logic
*2
Negative TTL Select 1st file in sorting order
Negative TTL Select 2nd file in sorting order
Negative TTL Select 3rd file in sorting order
Negative TTL Select 4th file in sorting order
Negative TTL Select 5th file in sorting order
Negative TTL Switchies current directory
Negative TTL Press while operating keys q to y, !1 and !2 to switch their function.
Negative TTL Starts playback of the current file.
– –
Negative TTL Stop file playback.
Negative TTL Skips in the sorting order.
Negative TTL Skips in the reverse order.
Negative *4 Programmable output 1
TTL
Negative TTL *4 Programmable output 1
– – Outputs +5V for driving an external devide (NOTE 1).
Description of pin
Modes other script mode
Normal
Select 6th file in sorting order
Select 7th file in sorting order
Select 8th file in sorting order
Select 9th file in sorting order
Select 10th file in sorting order
Switchies current directory
Turns the repeat mode on and off.
Turns the single mode on and off.
ENGLISH
Script
mode
Shift
KEY 1
KEY 2
KEY 3
KEY 4
KEY 5
KEY 6
*3
KEY 7
KEY 8
27