Kenwood KDV-MP6433 Instruction Manual page 66

Help? Term
CD READ (Reading a CD)
Specifies the method for reading a CD.
When a specially formatted CD does not play properly,
specifying "2" will make the CD play. Please note that
even after selecting "2", it will not be possible to play
some music CDs. Also, if you set it to "2", you cannot
play audio or picture files. Under normal circumstances,
set at "1".
1 : It automatically distinguishes between a disc with
audio files/picture files and a music CD during
playing the disc.
2 : It overrides to play the disc as a CD.
CODE SET (Security code set)
The security code is set.
Once a security code has been set, when the
unit is used for the first time after the unit has
been unplugged, the unit's power cord has been
disconnected or the reset button has been pushed, the
power will not turn on unless you enter the set security
code. In other words, this function helps prevent theft
as the security code must be entered after the unit has
been removed from the vehicle.
DIM (Dimmer)
Display brightness automatically switches on in
conjunction with the vehicle light switch.
DISP
When set at the "OFF" position, the display disappears
if the unit is not operated for a period of five seconds.
This prevents the display from being reflected in the
vehicle's windows.
However, if any of the modes have been set the display
will not disappear even after five seconds.
When the display is off, pressing any buttons will return
the display.
Please note that when the display disappears, the
only operations that can be performed are turning
the power ON and OFF, adjusting volume, selecting a
source and ejecting a disc.
DSI (Disabled system indicator)
Turns the security indicator ON and OFF.
When this function is ON and the panel has been
removed, the LED for the [0] (Eject) button flashes so
that it functions as a theft prevention warning light.
KEY (Button illumination)
You can choose green or red for illuminating the
buttons.
66 KDV-MP6333/KDV-MP6433
M/V (Microvision version)
Displays the version of copyright protection technology
used in a DVD.
SCL (Scrolling)
In cases where there are too many characters to display
all the information when selecting disc or track titles,
disc or track text, group titles, folder names, file names,
track names and artist names or album names on the
display, use this function to scroll down so that all the
information is displayed.
When this function is set at "AUTO" the display scrolls
repeatedly. When it is set at "MANU" the display scrolls
once only when the display changes.
SWPRE (Switchable preout)
This function sets audio to be output by the preamp
output terminal.
R : Rear sound is produced. This is set when rear sound
is produced from the optional power amplifier. (KDV-
MP6333 only)
SW : Outputs audio used by the subwoofer.
AV : Outputs audio not affected by audio controls. Is set
when connected to a rear monitor.
ZONE2
Sets the output source (front speaker or rear speaker)
for the sub source (AUX input (KDV-MP6333 only) or
DVD) when the dual zone function is ON.