Table of Contents
Advertisement
Quick Links
DVD-RECEIVER
KDV-412
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new DVD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model KDV-412 Serial number
US Residence Only
Register your Kenwood product at
www.Kenwoodusa.com
© B64-3435-00/02 (KW)
Register Online
Advertisement
Table of Contents
Related Manuals for Kenwood KDV-412
Summary of Contents for Kenwood KDV-412
- Page 1 Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KDV-412 Serial number...
-
Page 2: Table Of Contents
Title/Text scroll Audio Control Detailed audio control Audio setup Speaker setup System Q Subwoofer output control KDV-412 Basic Operations Common operations Watching DVD/VCD (video CD)/ Video (MPEG) files Listening to CDs and audio files Viewing picture (JPEG) files Listening to radio... - Page 3 Menu Menu setup Setting security code Clearing security code Security code entry Adjusting the clock HD Radio Receive mode setting AUX name select Demonstration setup Audio preset Recalling audio preset values T.I (Traffic Information) Remote Controller Battery installation Remote Controller mode switch Common operations (AUD mode) DVD/VCD/CD/Audio files (DVD mode) Radio (AUD mode)
-
Page 4: How To Read This Manual
For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. KDV-412 Tuning mode Sets a tuning mode for selecting stations. Set to the menu mode SETUP... - Page 5 "DTS" and "DTS 2.0 + Digital Out" are trademarks of Digital Theater Systems, Inc. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other countries.
- Page 6 KENWOOD CORPORATION 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. Location : Bottom Panel FCC WARNING This equipment may generate or use radio frequency energy.
-
Page 7: Safety Precautions
Kenwood disc changers/CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/CD players. Note that any Kenwood disc changers/CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. -
Page 8: Notes
• If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • If the unit fails to operate properly, press the Reset button. -
Page 9: Region Codes In The World
Symbol Description Indicates a region number. The discs with this mark can be played with any DVD player. Indicates the number of audio languages recorded. Up to 8 languages can be recorded in a movie. You can select a favorite language. - Page 10 Super audio CD ‡ : Playback is possible. : Playback is partly possible. × : Playback is impossible. KDV-412 Use of "DualDisc" When playing a "DualDisc" on this unit, the surface Remark of the disc that is not played may be scratched while the disc is inserted or ejected.
-
Page 11: Handling Media
Handling media Handling discs • Do not touch the recording surface of the disc. • CD-R/RW, DVD-R/RW, and DVD+R/RW discs are easier to be damaged than a ordinary music CD. Use a CD-R/RW, DVD-R/RW, or DVD+R/RW disc after reading the cautions on the package. •... -
Page 12: Basic Operations
• While the attenuator is activated, the blinks. Canceling demonstration mode The demonstration mode should be canceled before use. For further information, refer to <Demonstration setup> (page 54). KDV-412 MENU STOP SCAN Adjusts audio output level Turns down indicator... - Page 13 Changes a source A playable source is selected in the following order each time the button is pressed. Receives FM/AM broadcast. (page 36) TUNER Plays back the disc (DVD/VCD/CD etc) inserted. (page 20/34) Plays back the disc inserted in an external player, such as a CD changer (optional accessory). (page CD CH/MD CH Outputs a sound signal input to the external AUX terminal (optional accessory).
-
Page 14: Watching Dvd/Vcd (Video Cd Video (Mpeg) Files
Ï to play back the previous chapter/scene/track. Pressing key to play the next chapter/scene/track. Pressing • The same operation is possible by sliding control knob Ç to the left or right. KDV-412 MENU STOP SCAN button Å to open the operation panel. - Page 15 Stop play key Ô to stop playing. Press key ‰ to resume playing from the Press position where play was previously interrupted. key Ô twice to start playback of a DVD from • Press the beginning when it is played next. button ı...
-
Page 16: Listening To Cds And Audio Files
For further information on the types, formats, and writing methods of playable audio files, refer to <Audio files> (page 62). • For further information on playing methods, refer to <Listening to Music Discs & Audio Files> (page 30). KDV-412 MENU STOP SCAN button Å... - Page 17 Fast scan forward/backward Push control knob Ç to the right and hold it for fast scanning forward through the track. Push control knob Ç to the left and hold it for fast scanning backward through the track. Stop play button ı to stop playing. Press Press control knob Ç...
-
Page 18: Viewing Picture (Jpeg) Files
Move control knob ı to the right to display the next picture file. • During driving, the image from the picture files will not be displayed for safety. The image is displayed after the vehicle stops and the parking brake is applied. KDV-412 MENU STOP SCAN button Å... -
Page 19: Listening To Radio
Listening to radio SETUP Changing the radio band Move control knob ı up to change the radio bands as follows: FM band 1 FM 1 FM band 2 FM 2 FM band 3 FM 3 • The indicator turns on during stereo reception. •... -
Page 20: Watching Dvd/Vcd/Video Files
Move control knob to the left to move backward frame by frame. • When playing back a video file, playing frame-by-frame backward is disabled. KDV-412 Repeat play Repeats the chapter or track being played. SETUP MENU... -
Page 21: Changing Audio Channel (Only For Vcd)
Changing audio channel (Only for VCD) Sets up the audio channel. The setting changes as follows each time the key is pressed. Display Setting "LL" Only left audio channel is output. "RR" Only right audio channel is output. "ST" Stereo sound is output. •... -
Page 22: Zoom
The display position moves in the direction of the arrow pressed. • Zooming may not be possible with some discs, or zoom may be canceled in some scenes. KDV-412 DVD menu (Only for DVD) Sets the DVD menu. Display a DVD menu... -
Page 23: Pbc Setup (Only For Vcd)
PBC setup (Only for VCD) Sets up PBC (Play Back Control). Each time the key is pressed, the PBC function turns ON/OFF. English... -
Page 24: Dvd Setup
Specifies the information etc to be displayed on the monitor. Set to Setup mode Open the display menu Select features to set Select additional features for JPEG setup. KDV-412 Set up the features Status Information Turns the status and icon display ON/OFF. Display Setting "ON"*... -
Page 25: Audio Setup
Display Effect Turns visual effects ON/OFF. Display Setting "ON"* Visual effects are added. "OFF" Visual effects are not added. * Indicates default configuration status after purchase. Exit the setup After is selected on each screen the previous screen appears. Audio setup Sets up the DVD audio functions. -
Page 26: Cd Player Setup
Setting Audio file discs and music CDs are identified automatically. It overrides to play the disc as a CD. * Indicates default configuration status after purchase. KDV-412 Exit the setup After is selected on each screen the previous screen appears. - Page 27 Select features to set Select additional features for language setup. Set up the features Language Sets up the subtitles displayed, audio, etc. for DVD playback. For further information on the setting method, refer to <Language setup> (page 28) . Parental Sets up a parental level.
-
Page 28: Language Setup
DVD setup Language setup Sets up the DVD subtitle and audio menu languages. Display the language menu screen Refer to <DVD player setup> (page 26). Select language features to set Display Setting "Audio Language" Sets the audio language. "Subtitle Language"... -
Page 29: Parental Level Setup/Change
Changes the parental level and password for discs and scenes. Display the Parental screen Refer to <DVD player setup> (page 26). When setting it for the second time and after, the message "Input Code No. " will be displayed. Enter a 4-digit password, and select... -
Page 30: Listening To Music Discs & Audio Files
"FILE REP" File repeat ON "FOLD REP" Folder repeat ON "REP OFF" Repeat play OFF KDV-412 Scan play Searches for a track/file by scanning the first 10 seconds of each track/file in a disc/folder. Start scan play SETUP When you get to a track/file you want to hear ... -
Page 31: Random Play
Random play Performs random playback of the tracks/files in a CD/folder. SETUP MENU STOP SCAN DISC RDM (while playing a CD) FOLD RDM (while playing an audio file) Each time the button is pressed, the random play mode is alternately turned ON/OFF. •... -
Page 32: Select Mode
<Audio files> (page 62). • Titles can be scrolled even in the select mode. For further information, refer to <Title/Text scroll> (page 31). KDV-412 File select Selects a file from a folder being played according to a specified file number. -
Page 33: Folder Select 2
Folder select 1 Searches for a folder in the order of the media directory. This method is useful if audio files are sorted in folders by category and artist. Set to the folder select 1 mode For details on how to select the mode, refer to <Select mode>... -
Page 34: Watching Picture Files
Display Status "FILE REP" File repeat ON "FOLD REP" Folder repeat ON "REP OFF" Repeat play OFF KDV-412 Scan play Displays and scans pictures in a folder for 10 seconds one at a time. Start scan play PTY/C.S. DISP F.SEL M.RDM... -
Page 35: Random Play
Random play Performs random display of the picture files in the displayed folder. SETUP MENU STOP SCAN FOLD RDM The random play mode is turned ON/OFF alternately each time the button is pressed. • Move control knob to the right to randomly select the next file. -
Page 36: Listening To Radio
SETUP MENU STOP SCAN A-MEMORY • The auto memory ends after 6 stations have been memorized or the whole frequency has been scanned. KDV-412 Manual memory Memorizes the stations received. Select a radio band Select a radio station AUTO SCRL PTY/C.S. -
Page 37: Tuning Mode
Tuning mode Sets a tuning mode for selecting stations. Select a tuning mode SETUP The mode changes in the following order each time the button is pressed. Display Setting "AUTO 1" Receives stations with the best reception. (Auto 1) "AUTO 2" Receives the stations memorized. -
Page 38: Rds Control
Top 40 Country Oldies Soft Nostalgia Jazz Classical R & B Soft R & B Language KDV-412 AUTO SCRL PTY/C.S. DISP Search for a station with the selected Program Type When you want to search for other stations Display "SPEECH"... -
Page 39: Registration Of A Station As A Pty
Registration of a station as a PTY Registers a Program Type for stations without PTY data. Receive the station you want to register Select the Program Type to register Refer to <PTY (Program Type)> (page 38). Register the Program Type SETUP MENU STOP... -
Page 40: Audio Control
(page 48), and for subwoofer output, refer to <Subwoofer output control> (page 42). • "SW L" cannot be adjusted if "SWPRE" is set to "AV". KDV-412 Audio setup Sets up volume offset, dual zone function, etc. Start audio setup... -
Page 41: Speaker Setup
Set up each feature SETUP MENU STOP SCAN The setting range of each item is as follows: Feature Setting range HPF/HPR THRU (Filter Off)/40/60/80/100/120/150/ 180/220 (Hz) 50/60/80/100/120 (Hz)/THRU (Filter Off) PHAS REV (180˚)/NML (0˚) V-OFF -8 – 0 LOUD OFF/ON AVOUT -15 –... -
Page 42: System Q
• If the System Q setting is changed, the values ("BAS L", "MID L", and "TRE L") set in the <Adjusts sound quality and others> are replaced with the System Q value. KDV-412 Subwoofer output control Turns the subwoofer output ON/OFF. -
Page 43: Tel Mute Control
TEL Mute Control The audio system automatically mutes when a call comes in. TEL Mute When a call comes in CALL The audio system pauses. Listening to the audio during a call SETUP MENU STOP SCAN The "CALL" display disappears and the audio system comes back ON. -
Page 44: Display Control
"FREQ/PS" Program Service name or Frequency (FM) "R-TEXT" Radio text, Program Service name or Frequency (FM) "FREQ" Frequency indication (AM) "CLOCK" Clock KDV-412 While playing CDs Display Setting "D-TITLE"*1 Disc title "T-TITLE"*1 Track title "P-TIME" Track number & Play time "A-TIME"*2... - Page 45 While playing VCDs Display Setting description "P-TIME"*6 Scene/Track play time "S-TIME"*7 Scene play time "A-TIME"*6 Disc play time "R-TIME"*6 Remaining disc time "V-LABEL" Volume label "CLOCK" Clock *6 Can be displayed when the PBC function is OFF. *7 Can be displayed when the PBC function is ON. Exit display selection SETUP AUTO...
-
Page 46: Monitor Information Display & File Selection
Information on the disc and the file is displayed. Depending on discs, you can switch the displayed information as you press this button. KDV-412 You can select the information to show when "∞" and "5" are displayed. Display the file list "... -
Page 47: Removing Operation Panel
Removing operation panel Removes the operation panel. Open the operation panel Remove the operation panel Antitheft warning lamp • Removing the panel turns off the power. • Since the panel is a precision component, it may be damaged by shock when exposed to vibration or dropped. -
Page 48: Menu
Select features to set The features displayed vary depending on the source. Set up each feature • For details on how to set features followed by a page number, refer to the page shown. KDV-412 Display "CODE SET"/ "CODE CLR" "BEEP" "CLK ADJ"... - Page 49 : Can be set in standby state. : Can be set in other than standby state. : Can be set while accessing DVD source. : Can be set during FM reception. : Can be set while accessing AUX EXT source. : Can be set while accessing HD Radio source.
-
Page 50: Setting Security Code
ENTER CODE Enter a security code Select the digit to enter. Select a number to enter. KDV-412 Confirm the entry Repeat the entry Using the same method as in the step 4, enter the same security code. Confirm the entry PTY/C.S. -
Page 51: Security Code Entry
Display the security code canceling feature Select the security code canceling feature SETUP MENU STOP SCAN ENTER CODE –––– Enter a security code Select the digit to enter. Select a number to enter. Enter the security code set in <Setting security code>... -
Page 52: Adjusting The Clock
Adjust "Minutes" Exit clock adjustment SETUP MENU STOP SCAN • After "Minutes" is adjusted, the clock starts with 00 seconds. KDV-412 HD Radio Receive mode setting Setup for receiving HD Radio stations. Set to the menu mode PTY/C.S. DISP SETUP F.SEL M.RDM... -
Page 53: Aux Name Select
Exit Receive mode Setting. SETUP MENU STOP SCAN • Even if the Receive mode is set to "AUTO" while a Ball game mode program (non-delayed broadcast program) is received, the Receive mode will automatically switch to Analog broadcast only. AUX name select Specifies the display to appear when AUX source is selected. -
Page 54: Demonstration Setup
• This setting can be used in the standby state. For the basic method to operate the menu, refer to <Menu setup> (page 48). KDV-412 Audio preset Memorizes the audio settings. These will be retained even when the Reset button is pressed. -
Page 55: Recalling Audio Preset Values
Exit the audio preset mode SETUP STOP SCAN MENU • The settings cannot be memorized by source. Only 1 set of audio control settings can be memorized. • You can memorize the features in <Detailed audio control> and <Audio setup>. Note, however, that the values set for "R-VOL", "BAL", "FAD", "AVOUT"... -
Page 56: Traffic Information)
Information function is turned ON, you will be switched to an FM station. • The volume adjusted while receiving traffic information is automatically memorized and the next time traffic information is accessed, you will receive it at that set volume. KDV-412... -
Page 57: Hd Radio Control
HD Radio Control Connecting the optional HD Radio Tuner (KTC-HR100/TR) allows you to listen to HD Radio with this unit. About HD Radio • When you connect an HD Radio, the tuner features of the unit are disabled and those of the HD Radio tuner are enabled. -
Page 58: Remote Controller
In such instances, replace the battery with a new one. KDV-412 Remote Controller mode switch The functions operated from the remote controller differ depending on the position of the mode switch. -
Page 59: Common Operations (Aud Mode)
Common operations (AUD mode) Source switching Switches to the source to be played. Volume control Adjusts the volume. Volume attenuator Press the key once to lower the volume. Press again to restore the previous volume. Audio control Adjusts the sound quality. Select the feature you want to adjust. -
Page 60: Dvd/Vcd/Cd/Audio Files (Dvd Mode)
Pauses the track. Press again to resume playing. Stop Memorizes the last point where the disc stopped. When pressed again, the last point is deleted. KDV-412 Direct search Pressing this button switches the features that can be searched directly. Title number... -
Page 61: Radio (Aud Mode)
Numeric keypad • Specify the number to search in direct search. Radio (AUD mode) Band switching Switches to bands received by the unit. Station selection Switches to broadcast stations received by the unit. Direct tuning After pressing this key, use the keypad to specify the broadcast station you wish to receive. -
Page 62: Help? Playing Files
Please note that file and folder names can be displayed using a maximum of 128 characters. (Includes period ". " and three-letter file extension.) KDV-412 For information on characters that can be used, refer to the writing software manual or to the <File names>... - Page 63 Order for playing audio files The order in which files or folders are selected using Playback, Folder Search, File Search and Folder Select is the order written into the writing software. As a result, there may be occasions when the order in which you expect tracks to play does not correspond to the actual order in which they play.
-
Page 64: Video Files
Disc formats, file and folder names and playing order are the same as those for audio files. Refer to <Audio files> (page 62). KDV-412 Picture files This unit can play JPEG files. The following restrictions apply to the formats and discs that this unit can play. -
Page 65: General
Help? Troubleshooting General The power does not turn ON. ✔ The fuse has blown. After checking for short circuits in the wires, replace the fuse with one with the same rating. ✔ The speaker wire has a short-circuit or touches the chassis of the vehicle, and then the protection function is activated. -
Page 66: Help? Troubleshooting
✔ CA-C1AX/ CA-C2AX is connected to KCA- S220A or other units. Connect the CA-C1AX/ CA-C2AX directly to this unit. KDV-412 Playing discs Cannot insert disc. ✔ There is already another disc inserted. Remove the inserted disc and insert the disc you want to play. -
Page 67: Audio Files
Cannot select soundtrack language, subtitle language or angles, or the disc does not play in the specified language. ✔ Multiple languages or angles have not been included. It may be possible to select these using the Menu. Refer to the disc's instruction leaflet. The VCD Menu (Playback Control) is not displayed ✔... -
Page 68: Help? Term
This unit is equipped with two high pass filters, one in the front speaker (HPF) and one in the rear speaker (HPR). KDV-412 LPF (Low pass filter) A low pass filter cuts out frequencies higher than the cutoff frequency. -
Page 69: Menu
Menu AMP (Built-in amp output) Output from the built-in amp is turned ON and OFF. When there is a system where power amps are connected to the preamp output terminals of both the front speaker and the rear speaker, operation of the built-in amp can be stopped by turning this function "OFF". - Page 70 Synchronization takes 3 to 4 minutes. M/V (Macrovision Version) Displays the version of copyright protection technology used in a DVD. ZONE2 Sets the output destination (front speakers or rear speakers) of the sub source when the dual zone function is ON. KDV-412...
-
Page 71: Help? Error
Is not operating correctly due to some reason or other. ➡ Push the unit's Reset button. If the "E-07−67"/ "E-77" message does not disappear, see your nearest Kenwood dealer. HOT ERR : When the internal temperature of this unit rises to 60°C or more, the protection circuit is activated and you may not be able to operate the unit. -
Page 72: Dvd Language Codes
Fiji Faroese French Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hebrew Hindi Croatian Hungarian Armenian Interlingua Interlingue Inupiak Indonesian KDV-412 Code Language Icelandic Italian Japanese Javanese Georgian Kazakh Greenlandic Cambodian Kannada Korean Kashmiri Kurdish Kirghiz Latin Luxembourgish Lingala Laotian... -
Page 73: Accessories/ Installation Procedure
Accessories/ Installation Procedure Accessories Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2. Make the proper input and output wire ...1 connections for each unit. 3. Connect the speaker wires of the wiring harness. 4. -
Page 74: Connections
Connections KDV-412 Television monitor, etc (optional accessory) Parking sensor wire Junction cable (Light Green) (Accessory8) For the sake of safety, be sure to connect the parking sensor. • Connect to the vehicle's parking brake detection switch harness using the supplied relay connector. - Page 75 When using the optional power amplifier, connect to its power control terminal. Connect to the terminal that is grounded when either the telephone rings or during conversation. • To connect the Kenwood navigation system, consult your navigation manual. To car light control switch Car fuse box...
-
Page 76: Installation
8 mm MAX. ø5mm ø5mm KDV-412 • During installation, do not use any screws except for those provided. The use of different screws might result in damage to the main unit. • Damage may occur if a screwdriver or similar tool is used with excessive force during the installations. - Page 77 • Never insert the screws in any other screw hole than the one specified. If you screw them in another hole, it will contact and may cause damage to the mechanical parts inside the unit. Removing the hard rubber frame Engage the catch pins on the removal tool and remove the two locks on the upper level.
-
Page 78: Specifications
AM tuner section Frequency Range (10 kHz) : 530 kHz – 1700 kHz Usable Sensitivity (S/N : 20dB) : 28 dBμ (25 μv) KDV-412 DVD player section D/A Converter : 24 bit Decoder : Linear PCM/ Dolby Digital/ dts/ MP3/ WMA Wow &... - Page 79 Audio section Preout Level/Load : 4000 mV/10 kΩ (CD/CD-CH) Video Out Level/Load : 1 Vp-p /75 Ω Preout Impedance : ≤ 600 Ω Speaker Impedance : 4 – 8 Ω Maximum output power : 50 W × 4 Full Bandwidth Power (at less than 1% THD) : 22 W ×...