Parental Level Setup/Change - Kenwood KDV-MP6433 Instruction Manual

Parental level setup/change

Changes the parental level and password for discs
and scenes.
1
Display the Parental screen
Refer to <DVD player setup> (page 24).
When setting it for the second time and after,
the message "Input Code No. " will be displayed.
2
Enter a 4-digit password, and select
3
Select features to set
Level
Set the parental level.
Display Setting
"OFF" Parental level is not set.
"1" Parental level High
"8" Parental level Low
Code No.
This needs to be entered when changing the
password for the parental level.
Enter a 4-digit password, and select
4
Exit the setup
After and
each screen the previous screen appears.
• Resetting this unit will clear the parental level and
password.
• Some discs may require you to enter a password before
a scene appears that has a parental level higher than
specified. In this case, the playback resumes when you
enter the password.
• If the disc being played has no parental level, playback is
not restricted.
.
are selected on
English 27