D Programming An Sdm Memory - Icom IC-F510 Instruction Manual

3
BIIS OPERATION
D D Programming an SDM memory
(optional DTMF microphone required)
qDuring standby condition, push [DIGITAL (P1)] twice, then
push [ ]/[ ] to select the desired SDM to be edited.
w Push [✱] or [#] to enter the message editing condition.
• The first character blinks when [#] is pushed, the last character
blinks when [✱] is pushed as below.
ePush the appropriate digit key, [0] to [9], to enter the de-
sired character.
• See the table at right for the available characters.
[ ]
• Pushing also enters space, pushing
lected character.
rPush [✱] to move the cursor to the right, push [#] to move
the cursor to the left.
t Repeat steps e and r to set the desired text message.
yPush [DIGITAL (P1)] for 1 sec. to overwrite the set content
into the memory.
• Push [DIGITAL (P1)] momentarily to cancel the editing and re-
turn to the original message indication.
19
• Available characters
Key
[0]
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[ ]
deletes the se-
[8]
[9]
Characters
(0) (.) (!) (?) (') (")
(_) (() ()) (<) (>)
(1) (Space) (#) (✱) (/) (+)
(&) (%) ($) (@) (^)
(2) (A) (B) (C) (a) (b)
(3) (D) (E) (F) (d) (e)
(4) (G) (H) (I) (g) (h)
(5) (J) (K) (L) (j) (k)
(6) (M) (N) (O) (m) (n)
(7) (P) (Q) (R) (S) (p)
(8) (T) (U) (V) (t) (u)
(9) (W) (X) (Y) (Z) (w)
(,) (;) (:)
([) (])
(–) (=) ( / )
(c)
(f)
(i)
(l)
(o)
(q) (r) (s)
(v)
(x) (y) (z)