Delay Time Setting - Kenwood DVR-605 Instruction Manual

The ideal listening position for 6-channel surround playback is the point at equal distance from all speakers.
By setting the delay time for the center and surround speakers, this item realizes the ideal listening position virtually.
(The center and surround speakers can be set as if they are laid out on the dotted line circle shown below.)
Ideal center speaker position
L SW
C
L
C
S
L

Delay time setting

This operation must be performed following the
adjustment of the speaker level setting on page
54.
1 Press SETUP key.
2 Press the TRIM (5/∞) keys to se-
lect the speaker distance.
3 Press SETUP key.
4 Press the TRIM (5/∞) keys to se-
lect the speaker distance.
R
R
S
S
R
Ideal surround
speaker position
SETUP
Active EQ./
SOUND
5
TRIM
∞
SETUP
Active EQ./
SOUND
5
TRIM
∞
How to set the delay time
Delay time setting sets the delay time converted to the
distance from the speaker to the listening position.
The front speakers (L/R) can be adjusted between 40 feet
(12 m) and 3 feet (0.9 m).
The range which can be set for the center speaker (C) and
the surround speakers (LS/RS) differs according to the
setting for the front speakers. A longer distance than for
the front speakers can not be set.
Return to the original display is made when no operation
is performed for about 5 seconds.
Feet indication
Meter indication
The process advances to center speaker adjustment
when the SETUP key is pressed.
Repeat 3 and 4 4 4 4 4 in the same way to adjust the
surround speakers.
55
Speaker setting
DVR-605/DVR-6100/DVR-6100K (EN)
Blinks