Playback Of Disc; Basic Play - Kenwood DVR-605 Instruction Manual

Playback of disc

26

Basic play

1
Load a disc
MAIN UNIT
OPEN/CLOSE
2
Select the DVD CD
MAIN UNIT
INPUT
÷ When a disc is set on the tray and DVD/CD is selected,
playback of the disc will be started automatically.
3
Start playback
MAIN UNIT
PLAY/PAUSE
6
÷ Each press PLAY/PAUSE
key on the main unit
pauses and plays the disc
alternately.
To stop playback
MAIN UNIT
STOP
7
0
REMOTE
DVD/CD
REMOTE
3
÷ Press 8 key on the remote
control unit to pause the disc.
PRESET
8
REMOTE
AUTO/MONO
7
DVD/CD
TOP MENU
3
7
8
1 Open the tray.
2 Place a disc.
3 Close the tray.
÷ When the PLAY/PAUSE key on the main unit is pressed
instead of the OPEN/CLOSE key in step 3, the tray will
close and playback will start automatically.
When a Disc Menu appears on the screen
In case of interactive DVDs, a Disc Menu appears on the screen.
Then press ENTER to select specific menu you want to play by using
Cursor keys.
When a menu screen is recorded on the disc, the
menu screen will be displayed when the TOP MENU
key is pressed. At the menu screen, the menu can be
selected by pressing the Cursor keys.
÷ When the PLAY/PAUSE key on the main unit is pressed while
an input other than disc is selected, the unit will be switched to
DVD/CD and playback will start.
TRACK No. (CD)
CHAPTER No. (DVD)
TITLE No. (DVD)
RESUME playback
When the STOP key has been pressed once during
playback to stop the playback, and then playback is
started again, play will start from the point where
the playback had been stopped. This is called the
RESUME function. When the STOP key is pressed
again during stop, the RESUME function is can-
celled.
RESUME is cancelled when 5 minutes have passed in
RESUME status.
DVR-605/DVR-6100/DVR-6100K (EN)
STOP
PLAY/PAUSE
OPEN/CLOSE INPUT
TOP MENU
Label side
Time display