Clarke IMAGE 16i Operator's Manual page 16

CLARKE TECHNOLOGY Image 16 230V Operator's Manual
WARNING: Always use this machine with an AC
three-conductor electrical system con-
nected to the electrical ground. Re-
place any worn, cut or damaged
cords. Replace any damaged plugs,
receptacles, or connector bodies. Do
not move the machine over an elec-
trical cord. Always lift the cord over
the machine.
EXTENSION CORDS
Use only an approved extension cord with two main
conductors and one earthing conductor. The machine
has a power cord with wire size 1.5mm
WARNING: If you use an extension cord, use an
extension cord with minimum wire
size 1.5mm
cord longer then 15 meters. Do not
join two extension cords.
WARNING: Do not cut, remove or break the ground
terminal. Do not try to fit a three-ter-
minal plug into a receptacle or con-
nector body that does not fit the plug.
If the receptacle or connector body
does not fit the plug, see your autho-
rized Clarke Technology dealer to get
an authorized person to make the con-
nection.
.
2
. Do not use an extension
2
Page 15