Protection For Transportation - Epson L200 Service Manual

L200/L201/L100/L101

1.1.3 Protection for Transportation

Before packing the printer for returning it to the user, secure it at the specified points with strong tape to avoid
damaging the printer or ink leakage during transport, and make sure to check the points as follows.
Securing each parts
Secure the following parts with strong tape (width: 22 mm).
Securing the Carriage Assy
1. Cofirm that the Carriage Assy is locked in the home position.
2. Attach the unfolded end of strong tape (fold the other end back 5 mm) on the bottom left of the CR
Cover.
3. Pull the tape to the right side of the housing and attach it tightly.
Securing the Ink Tank
Secure both sides of the Top Cover with strong tape (x2).
•
Secure the Ink Supply Tank Assy and Ink Supply Holder Assy with strong tape (x1).
•
Ink Supply Tank Assy
Fold over the tape edge by 10 mm
Disassembly/Reassembly
Figure 1-4. Securing the Carriage Assy
Ink Supply Holder Assy
Strong tape (22 mm x 55 mm)
Figure 1-5. Securing the Ink Supply Tank Assy
Strong tape
Strong tape (22 mm x 105 mm)
Fold over the tape edge by 10 mm
Overview
Fold over the tape edge by 15 mm
Top Cover
Revision A
12
Confidential