Using Rds Function ( For Europe Only) - Kenwood DVT-6300 Instruction Manual

RDS is a system which transmits useful information (digital
data) for FM broadcasts together with the broadcast signal.
Tuners and receivers designed for RDS reception can extract
the information from the broadcast signal for use with
various functions such as automatic display of the station
name.

Using RDS function ( for Europe only)

Functions made possible with RDS
PTY (Program Type Identification) Search :
The tuner automatically searches for a station which is
currently broadcasting a specified program type (genre).
PS (Program Service Name) Display :
When an RDS broadcast is received, the station name is
automatically displayed.
Using the RDS Display function
1
Select the FM broadcast station.
2
Press the RDS. key on the remote.
Each press switches the display mode as follows.
1 PS NAME display
2 Current FM frequency display
3 PTY display
4 RT display
5 CT display
∞
or
PRESET
RDS
RT (Radio text) :
Displays the radio text data transmitted by some RDS
stations when you select the RT mode.
CT (Clock Time) :
Decodes the real time clock from the FM frequency.
PS NAME
÷ If the PS information is being received, the PS name (BBC,
AFO, NDR, etc.) is shown on the display.
÷ If the PS information is not received, the original FM fre-
quency is shown.
÷ Even though no RDS key is pressed, the reception of PS
information ensues the PS name is displayed.
RT display
÷ Text data accompanying the RDS broadcast scrolls across
the display.
÷ If the RT information is not received, the "RT NONE" is
shown on the display.
CT display
÷ If the CT information will take up to 2 minutes to be decoded
therefore the clock is not displayed immediately.
÷ If the CT information is not received, the "CT NONE" is
shown on the display.
÷ The CT clock does not update the system clock.
Receiving broadcast station
DVR-6300 (EN/K,P,E,X)
4 TUNING ¢
27