Physical Description; Hardware Installation - Axis 150 Quick Installation Manual

Quick Installation Guide
This guide covers the installation and basic setup procedures for the
AXIS 150/152. If you need more detailed instructions, please refer to
the AXIS 150/152 User's Manual.

Physical Description

LPT1 Printer
Connector
LPT1 Printer
Connector
Installing the AXIS 150/152
You should proceed with the following instructions, as appropriate
for your type of network. Refer to all relevant sections if you intend
to use the AXIS 150/152 in a multiprotocol environment.

Hardware Installation

1. Note the serial number found on the underside label of the AXIS
150/152. You need this number during the configuration.
2. Switch off the printer. Remove the AXIS 150/152 power supply.
3. AXIS 150 only: Connect your AXIS 150 to the network using a
shielded twisted pair (10baseT) cable.
4. AXIS 152 only: Connect your AXIS 152 to the network using a
shielded thin wire (10base2) cable.
5. Switch on the printer. Connect the AXIS 150/152 power supply.
6. Ensure that the Network Indicator is flashing. To check the
connections, print a Test Page by depressing the Test Button.
External Power
LPT2 Printer
Supply Connector
Connector
AXIS 150 Network Print Server
External Power
LPT2 Printer
Supply Connector
Connector
AXIS 152 Network Print Server
Ethernet
Connector
Test Button
Network Indicator
Power Indicator
Ethernet
Connector
Test Button
Network Indicator
Power Indicator