Connecting Wires To Terminals - Kenwood KDC-X7006 Instruction Manual

Connecting Wires to Terminals

To USB device
USB connector (1m)
(KDC-X7006U only)
Do not remove the cap
when you do not use the
USB cable. The connector
will cause the unit to
malfunction if it gets in
touch with any metallic
part of the vehicle.
Wiring harness
(Accessory1)
FRONT L
FRONT R
REAR L
REAR R
Power control wire (Blue/White)
Motor antenna control wire (Blue)
TEL mute wire (Brown)
Dimmer control wire (Orange / White)
External amplifier control wire (Pink/Black)
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) · (To car chassis)
|
34
English
Steering remote control
(Light Blue/Yellow)
REMO.CONT
To use the steering wheel
remote control feature,
you need to an exclusive
remote adapter (not
supplied) matches your
car is required.
Fuse (10A)
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
If no connections are made, do not let the wire come out from the tab.
P.CONT
ANT.
CONT
MUTE
ILLUMI
EXT.
CONT
Car fuse
box
ACC
FRONT
REAR
SUB
WOOFER
FM/AM antenna input
AUX input (Stereo)
Use the mini-plug which is stereo type and does
not have any resistance.
To Kenwood disc changer/ External optional accessory
To connect these leads, refer to the relevant instruction
manuals.
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
When using the optional power amplifier, connect to its power
control terminal.
Depending on what antenna you are using, connect either to the
control terminal of the motor antenna, or to the power terminal
for the booster amplifier of the film-type antenna.
Connect to the terminal that is grounded when either the
telephone rings or during conversation.
To connect the Kenwood navigation system, consult your
navigation manual.
To car light control switch
To "EXT.AMP.CONT. " terminal of the amplifier
having the external amp control function.
Ignition key
switch
Car fuse box
(Main fuse)
– +
Battery
Front left output (White)
Front right output (Red)
Rear left output (White)
Rear right output (Red)
Sub Woofer left output (White)
Sub Woofer right output (Red)