Related Manuals for Kenwood KDC-X700DAB
Summary of Contents for Kenwood KDC-X700DAB
- Page 1 KDC-X700DAB CD-RECEIVER INSTRUCTION MANUAL © 2013 JVC KENWOOD Corporation GET0972-001A (MW/M0)
-
Page 2: Table Of Contents
CONTENTS BEFORE USE Warning BEFORE USE Do not operate any function that takes your attention away from safe driving. BASICS Caution Volume setting: GETTING STARTED • Adjust the volume so that you can hear sounds outside the car to prevent accidents. •... -
Page 3: Basics
BASICS Faceplate Remote control (RC-406) Volume knob Remote sensor (Do not expose (turn/press) Display window to bright sunlight.) Pull out the insulation sheet when using for the first time. Detach button How to replace the battery Attach Detach How to reset Your preset adjustments will also be erased. -
Page 4: Getting Started
GETTING STARTED Set the initial settings Press B SRC to enter STANDBY. Press the volume knob to enter [FUNCTION]. Turn the volume knob to make a selection (see the following table), then press the knob. Press and hold to exit. To return to the previous setting item or hierarchy, press Cancel the demonstration Default: XX... -
Page 5: Digital Radio (Dab)
F/W UP Vxxx activated). For details on how to update the firmware, see: www.kenwood.com/cs/ce/ Start listening Press B SRC to select DAB. Press J BAND repeatedly (or press #FM+ on RC-406) to select DB1/ DB2/ DB3. Press and hold S / T (or press and hold S / T (+) on RC-406) to search for an ensemble. - Page 6 DIGITAL RADIO (DAB) • To store a service: Press and hold one of the number buttons Replay (1 to 6). Press and hold K SEEK (or press K on RC-406). • To select a stored service: Press one of the number buttons “REPLAY MODE”...
-
Page 7: Analog Radio
ANALOG RADIO DIGITAL RADIO (DAB) ASW SELECT TRAVEL, WARNINGS, NEWS, WEATHER, EVENT, SPECIAL, RAD INFO, SPORTS, FINANCE: Turn the volume knob to make a selection, then press the knob. “ ” appears in front of the activated announcement type. Automatically switch from any source to Digital radio ensembles broadcasting an activated announcement type. - Page 8 ANALOG RADIO Direct Access Tuning (using RC-406) AF SET ON: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception Press DIRECT to enter Direct Access Tuning. when the current reception is poor. ; OFF: Cancels. Press the number buttons to enter a frequency.
-
Page 9: Cd / Usb / Ipod
• Audio CD: TRACK REPEAT, REPEAT OFF and/ or • MP3/WMA/WAV file or iPod: FILE REPEAT, FOLDER REPEAT, REPEAT OFF USB cable from the rear of the unit • KENWOOD Music Editor Light (KME Light)/ KENWOOD Music Control (KMC) file ( 18): FILE REPEAT, REPEAT OFF iPod/iPhone Random play * Press 3 ... - Page 10 CD / USB / iPod Select a track/file from a list Direct Music Search (using RC-406) Set the skip search ratio For iPod: Applicable only when [MODE OFF] is Press DIRECT. While listening to iPod or KME Light/ KMC file... selected.
-
Page 11: Aux
Pandora® Preparation: Preparation: Do this Select [ON] for [BUILT-IN AUX]. ( 5) Install the latest version of the Pandora Pause or resume Press 6 IW (or press ENT IW application onto your device (iPhone/ Start listening playback on RC-406). iPod touch), then create an account and log in to Pandora. -
Page 12: Bluetooth
BLUETOOTH® You can operate Bluetooth devices using this unit. • Pairing request (via Bluetooth) is Pair a Bluetooth device automatically activated if an iPhone/iPod When connecting a Bluetooth device to touch is connected through the USB input Connect the microphone the unit for the first time, perform pairing terminal. - Page 13 BLUETOOTH® Bluetooth mobile phone Improve the sound quality during a call While talking on the phone... Do this Press the volume knob to enter [FUNCTION]. Receive a call Press or the volume knob or one of Turn the volume knob to make a selection (see the following table), then the number buttons (1 to 6) (or press press the knob.
- Page 14 BLUETOOTH® Bluetooth mode operations VOICE Speak the name of the contact you want to call or use the voice command to control the phone functions. ( 13, Use Voice Press to enter Bluetooth mode. Recognition) Turn the volume knob to make a selection (see the following table), then press the knob.
- Page 15 BLUETOOTH® Turn the volume knob quickly to enter alphabet search mode. Delete a contact The first menu (ABCDEFGHIJK) appears. To go to the other menu Not applicable for mobile phone that supports PBAP. (LMNOPQRSTUV or WXYZ1 ), press J / K. Turn the volume knob or press S / T to select the desired first Press to enter Bluetooth mode.
- Page 16 BLUETOOTH® Internet radio via Bluetooth Bluetooth audio player “DL PB ” appears and transfer the TRANSFER PB Operations and display indications may differ phonebook of the connected phone to Listen to Pandora according to their availability on the connected this unit manually. Preparation: device.
-
Page 17: Audio Settings
AUDIO SETTINGS While listening to any source... LOUDNESS LEVEL1/ LEVEL2: Selects your preferred low and high frequencies boost Press the volume knob to enter [FUNCTION]. to produce a well-balanced sound at a low volume level. ; OFF: Cancels. Turn the volume knob to select [AUDIO CONTROL], then press the SUBWOOFER SET ON: Turns on the subwoofer output. ;... -
Page 18: Display Settings
• This unit supports the PC application KENWOOD Music Editor Light and Android™ application KENWOOD Music Control. • When you play audio files with song data added using the KENWOOD Music Editor Light or KENWOOD Music Control, you can search for audio files by Genres, Artists, Albums, Playlists, and Songs. -
Page 19: Troubleshooting
• Sound cannot be heard. Clean the connectors. ( 2) • You cannot operate iPod if “KENWOOD” or “ ” is displayed • The unit does not turn on. on iPod. • Information shown on the display is About Pandora incorrect. - Page 20 TROUBLESHOOTING Symptom Remedy Symptom Remedy “NA DEVICE” appears. Connect a supported USB device, and check the connections. No Bluetooth device is • Search from the Bluetooth device again. detected. • Reset the unit. ( 3) “NO MUSIC” appears. Connect a USB device that contains playable audio files. Pairing cannot be •...
-
Page 21: Specifications
SPECIFICATIONS TROUBLESHOOTING Symptom Remedy Frequency Range L Band 1 452.960 MHz — 1 490.624 MHz Band III 174.928 MHz — 239.200 MHz Sound is being • Reduce the distance between the unit and the Bluetooth interrupted or skipped audio player. Sensitivity –100 dBm during playback of a •... - Page 22 SPECIFICATIONS Laser Diode GaAIAs Profile HFP (Hands-Free Profile) SPP (Serial Port Profile) Digital Filter (D/A) 8 times over sampling PBAP (Phonebook Access Profile) Spindle Speed 500 rpm — 200 rpm (CLV) OPP (Object Push Profile) A2DP (Advanced Audio Distribution Profile) Wow & Flutter Below measurable limit AVRCP (Audio/Video Remote Control Profile) Frequency Response (±1 dB)
-
Page 23: Installation / Connection
INSTALLATION / CONNECTION Warning Installing the unit (in-dash mounting) • The unit can only be used with a 12 V DC power supply, negative ground. • Disconnect the battery’s negative terminal before wiring and mounting. • Do not connect Battery wire (yellow) and Ignition wire (red) to the car Do the required chassis or Ground wire (black) to prevent a short circuit. -
Page 24: Wiring Connection
Antenna control wire) To rear speaker (right) Purple/Black (D) Wiring harness Ignition switch Car fuse box Brown To connect the Kenwood navigation system, refer your navigations manual. (Ignition wire) (Mute control wire) Yellow Car fuse box (Battery wire) (E) Extraction key... - Page 25 Installing the DAB antenna Determine the antenna installation position • The direction of the film antenna (F) changes depending on whether the film antenna (F) is installed on the Caution right side or left side. • The film antenna (F) is exclusively for use inside the vehicle. •...
- Page 26 Installation overview – Wait until the glass surface is completely Caution dry before proceeding. The antenna should be installed on the passenger side for When installing the antenna cable inside – Warm the surface of the windscreen with safety. the front pillar with the air bag installed defroster if it is cold (during winter).
- Page 27 Remove the application film (tag III). Remove the film covering the earth sheet and paste the earth sheet on the metal part of the vehicle. Provide sufficient leeway for the earth sheet so that it does not interfere with the interior parts (front pillar cover). Also take care that the interior parts do not interfere with the amplifier unit (G).
- Page 28 Pandora Media, Inc., used with permission. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.