Removing The Pcmcia Socket - AOpen OpenBook 1556 Service Manual

7. See "Removing the LCD Module" on page 64
8. See "Removing the Fan Module" on page 65
9. See "Removing the CPU Heat Sink" on page 65
10. See "Separating the Upper Case from the Lower Case" on page 68
11. See "Removing the Choke Heatsink" on page 74
12. See "Removing the Main Board" on page 74
13. See "Removing the Main Board Chassis" on page 75
14. Remove the four hex screw as shown here and then detach the I/O port bracket from the main board.

Removing the PCMCIA Socket

1. See "Removing the Battery" on page 55
2. See "Removing the Hard Disk Drive Module" on page 56
3. See "Removing the Optical Drive Module" on page 58
4. See "Removing the Middle Cover" on page 59
5. See "Removing the Keyboard" on page 60
6. See "Removing the Antennas" on page 61
7. See "Removing the LCD Module" on page 64
8. See "Removing the Fan Module" on page 65
9. See "Removing the CPU Heat Sink" on page 65
10. See "Separating the Upper Case from the Lower Case" on page 68
11. See "Removing the Choke Heatsink" on page 74
12. See "Removing the Main Board" on page 74
13. See "Removing the Main Board Chassis" on page 75
14. Release the four screws with a screwdriver and detach the PCMCIA socket from the main board.
76 OpenBook 1556