AOpen OpenBook 1556 Service Manual page 52

Removing a Password
Should you want to remove a password, do the following:
1. Use the cursor up/ down keys to highlight a password parameter (Setup, User or Hard Disk) and press the
e
key. The password box appears.
2. Enter the current password and press
e
3. Press twice without entering anything in the Enter New Password field and Confirm New
Password field to remove the existing password.
^
4. Press to return to the main menu.
u
5. Press . The following dialogue box appears.
6. Select Yes and press
Changing a Password
To change a password, follow these steps:
Follow these steps:
1. Use the cursor
e
key. The password box appears:
2. Enter the current password and press
3. Type the new password. The password may consist of up to eight characters (A-Z, a-z, 0-9).
IMPORTANT:Be very careful when typing your password because the characters do not appear on the
screen.
44
Set Supervisor Password Set Supervisor Password Set Supervisor Password Set Supervisor Password
Enter Current Password [ Enter Current Password [
Enter New Password Enter New Password Enter New Password Enter New Password
Confirm New Password [ Confirm New Password [
e
Setup Confirm ation Setup Confirm ation
Save Configuration changes and exit now? Save Configuration changes and exit now?
[Yes] [Yes]
e
to save the change and exit the BIOS utility.
w y
/ keys to highlight the Password parameter (Setup, User or Hard Disk) and press the
Set Supervisor Password Set Supervisor Password Set Supervisor Password Set Supervisor Password
Enter Current Password [ Enter Current Password [
Enter New Password Enter New Password Enter New Password Enter New Password
Confirm New Password [ Confirm New Password [
e
[ [
.
[N o] [N o]
[ [
.
] ]
] ]
] ]
] ]
] ]
] ]
OpenBook 1556