Speaker Setting; Switching Display - Kenwood KDC-W237S Instruction Manual

Speaker Setting

Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Speaker Setting mode
Press the [VOL] knob.
3
Select the Speaker type
Turn the [VOL] knob.
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
4
Exit Speaker Setting mode
Press the [VOL] knob.
Display
"SP OFF"
"SP 5/4"
"SP 6*9/6"
"SP OEM"

Switching Display

Changing the information displayed.
1
Enter Switching Display mode
Press the center of the Control knob for at least
1 second.
"DISP SEL" is displayed.
2
Select the Display item
Press the right or left side of the Control knob.
In Tuner source
Information
Program Service name or Frequency
Radio text, Program Service name or Frequency
Clock
In CD source
Information
Disc title
Track title
Play time & Track number
Clock
In Audio file source
Information
Music title & Artist name
Album name & Artist name
Folder name
File name
Play time & Music number
Clock
In Standby/ Auxiliary input source
Information
Source name
Clock
3
Exit Switching Display mode
Press the center of the Control knob.
⁄
• When you select the clock display, the display setting of
each source will be changed to the clock display.
• Album name cannot be displayed in WMA file.
• If the selected display item does not have any
information, alternative information is displayed.
Display
"FREQ"/ "FREQ/PS"
"R-TEXT"
"CLOCK"
Display
"D-TITLE"
"T-TITLE"
"P-TIME"
"CLOCK"
Display
"TITLE"
"ALBUM"
"FOLDER"
"FILE"
"P-TIME"
"CLOCK"
Display
"SRC NAME"
"CLOCK"
7
|
English