Audio Adjustments; Audio Control; Audio Preset Memory - Kenwood KDC-U6046L Instruction Manual

Audio Adjustments

Audio Control

You can adjust following Audio Control items;
Display Audio item
"SubWoofer" Subwoofer output OFF/ON
"Bass Boost" Bass Boost
"System Q" Preset Equalizer
curve
"Bass Adjust"
"Bass Center FRQ" Bass Center
Frequency
"Bass Level" Bass level
"Bass Q Factor" Bass Q Factor
"Bass EXT" Bass Extend
"Middle Adjust"
"Middle Center Middle Center
FRQ" Frequency
"Middle Level" Middle level
"Middle Q Factor" Middle Q Factor
"Treble Adjust"
"Treble Center FRQ" Treble Center
Frequency
"Treble Level" Treble level
"Balance" Balance
"Fader" Fader
"2Zone Rear Volume" Rear volume during
Dual zone
"SubWoofer Level" Subwoofer level
"Detailed Settings"
"HPF Front" Front High Pass
Filter
"HPF Rear" Rear High Pass Filter Through/40/60/80/100/
"LPF SubWoofer" Low Pass Filter
"Subwoofer Phase" Subwoofer Phase
"2Zone" Dual Zone System ON/OFF
"2Zone F/R Select" Dual Zone output
channel
"Supreme" Supreme setting
"Audio Preset" Audio Preset
memoy
"Volume Offset Volume offset
ADJ"
† Refer to <Audio Preset Memory> (page 8), <Audio Preset
Recall> (page 8)
⁄
‡
• "User": The customized Bass, Middle, and Treble levels are
effective.
• You can set Bass, Middle, and Treble for each source.
Range
Level1/Level2/OFF
"Rock"/ "Pops"/ "Easy"/
"Top40"/ "Jazz"/ "Game"/
‡
"Natural"/ "User"
40/50/60/70/80/100/
120/150 (Hz)
–8 — +8 (dB)
1.00/1.25/1.50/2.00
OFF/ON
0.5/1.0/1.5/2.0 (kHz)
–8 — +8 (dB)
1.00/2.00
10.0/12.5/15.0/17.5 kHz
–8 — +8 (dB)
Left 15 — Right 15
Rear 15 — Front 15
0 — 35
–15 — +15 (dB)
Through/40/60/80/100/
120/150/180/220 (Hz)
120/150/180/220 (Hz)
50/60/80/100/120/
Through (Hz)
Reverse (180°)/
Normal (0°)
Rear/Front
ON/OFF
Recall/Memory
†
–8 — ±0 (dB)
(AUX: -8 — +8)
• About Supreme
Technology to extrapolate and supplement with proprietary
algorithm, the high-frequency range that is cut off when
encoding at low bit rate (less than 128Kbps, Sampling
frequency is 44.1kHz).
Supplementing is optimized by compression format (AAC,
MP3 or WMA) and processed according to bit rate.
The effect is negligible with music that is encoded at high
bit rate, variable bit rate or has minimal high frequency
range.
• About Dual Zone System
Main source and sub source (Auxiliary input) output Front
channel and Rear channel separately.
- When "2Zone" is set to "ON", the main source sound and
AUX input sound are output to the front speakers and rear
speakers separately.
- Set up the channel of sub source by "2Zone".
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by Control knob.
- Adjust the volume of Rear channel by "2Zone Rear
Volume".
- The Audio Control has no effect on sub source.
- When Bluetooth audio source is selected, set "2Zone F/R
Select" to "Rear". "2Zone" cannot be turned "ON" when this
is set to "Front". While "2Zone" is turned "ON", "2Zone F/R
Select" function is disabled.
1
Select the source to adjust
Press the [SRC] button.
For how to select source item, refer to <Power and
source selection> (page 5).
2
Enter Audio Control mode
KDC-U6046 KDC-U6046L
Press the [AUDIO] button.
KDC-U7046BT KDC-U7046BTL
1) Press the [FNC] button.
2) Turn the Control knob to select "Audio
Control", and then press the [ENTER] button.
3
Select the Audio item to adjust
Turn the Control knob to select the audio item
for adjustment and then press the [ENTER]
button.
Press the [ ] button to return to the previous
item.
4
Adjust the Audio item
Turn the Control knob.
5
Determine the setting value
Press the [ENTER] button.
The previous item is displayed.
6
Exit Audio Control mode
Press the [ ] button for at least 1 second.
7
|
English