Repeat A-B Playback; Random Playback; Programmed Playback - Sylvania LD320SS8 Owner's Manual

Repeat A-B Playback

DVD CD VCD
You can repeat playback between A and B on a disc.
1
During playback, press [A-B] at your desired starting point (A).
2
Press [A-B] at your desired ending point (B).
• Point B should be in the same title or track as point A.
• Within a few seconds, the section A-B will begin to
play back repeatedly.
3
To cancel repeat A-B playback, press [A-B] repeatedly
until " OFF" appears.
Note:
• Repeat setting (except "ALL") will be cleared when moving to
another title, chapter, track/file or folder.
• During programmed playback, repeat setting will be
effective for the tracks/files in the program.
• Repeat playback or repeat A-B playback may not available
with some discs.
• Repeat A-B playback does not function during other repeat mode.
• To cancel point A, press [CLEAR] at step 1 in "Repeat A-B
Playback".
• Stopping playback will cancel repeat A-B playback.

Random Playback

CD MP3 JPEG
This function shuffles the playing order of tracks instead of playback in the sequence.
1
In stop mode, press [MODE] repeatedly until "RANDOM"
menu appears.
2
Press [PLAY B] to start random playback.
Note:
• To repeat the current track/file in the random mode, follow
the steps 1 and 2 in "Repeat Playback" on page 34 and select
" TRACK".
• To repeat the entire random selections, follow the steps 1
and 2 in "Repeat Playback" on page 34 and select "
• Random playback of MP3 or JPEG is not available while
"DUAL PLAYBACK" is "ON".
• Random playback will be kept until you press [STOP C].
A-
A-B
e.g.) audio CD
RANDOM
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
PLAY
ALL".

Programmed Playback

CD MP3 JPEG
You may determine the order in which tracks will play back.
1
In stop mode, press [MODE] repeatedly until
"PROGRAM" menu appears.
2
Use [Cursor K / L] to select a desired track/file, then
press [ENTER] to store.
• Additional tracks/files may be on other screens. Use
[Cursor s / B] to go on to the next / previous pages.
• Repeat this step until you have selected all the tracks/
files you wish to play back in the program.
or
• Up to 99 tracks/files can be ordered.
• If 8 or more tracks/files were in a program, use
[SKIP H / G] to see all the tracks/files.
While an MP3 or a JPEG folder is open:
- Press [Cursor B] when you want to go to the next
hierarchy.
- Press [Cursor s] when you want to go back to the
previous hierarchy (except for the top hierarchy).
- Press [TITLE] when you want to go back to the item in
the top hierarchy.
3
Press [PLAY B] to start programmed playback.
Note:
• Press [CLEAR] to erase the last track/file in the program if you make an error.
• To erase all programmed tracks/files at once, select "ALL CLEAR" and press
[ENTER] at step 2.
• While a program is being played back, [STOP C] works as follows:
- Pressing [STOP C] once: The track/file will be in the resume standby mode.
Next time you press [PLAY B], the playback will resume from the point
where it is stopped in the programmed playback. (For MP3 file, playback will
resume from the beginning of the current file.)
- Pressing [STOP C] twice: Resume mode will be canceled. Next time you
press [PLAY B], playback will restart from the first track/file in the original
order. However, your programmed playback can be restarted when you
follow the above steps. (Your programs are still stored until either the disc is
ejected or the unit is turned off.)
On some discs, [STOP C] will not work while the resume message appears.
Please wait until the message disappears.
• To repeat the current track/file in the program, follow the steps 1 and 2 in
"Repeat Playback" on page 34 and select "TRACK".
• To repeat the entire program, follow the steps 1 and 2 in "Repeat Playback"
on page 34 and select "ALL".
• Turning off the unit or ejecting the disc will erase the program.
• You cannot use [the Number buttons] to select another track/file during
programmed playback. Use [SKIP H / G] to select other tracks/files in
the program.
• You cannot combine random playback with programmed playback.
• You cannot alter a programmed order during playback.
• You can start programmed playback only while in "PROGRAM" menu.
e.g.) audio CD
PROGRAM
CD-DA TOTAL 0:00:00
T 1 3:31
T 2 4:28
T 3 4:19
T 4 3:58
T 5 4:12
T 6 4:02
T 7 3:55
ENTER
1/ 3 1/ 1
PLAY
T 1 3:31
CLEAR
PROGRAM
CD-DA TOTAL 0:08:22
T 4 3:58
T 15 3:18
T 16 4:24 T 16 4:24
ALL CLEAR
ENTER
1/ 1
3/ 3
PLAY
T 16 4:24
CLEAR
35
EN