Connecting Wires To Terminals; To Rear Right - Kenwood KDC-MP4023 Instruction Manual

Connecting Wires to Terminals

If no connections are made, do not let the wire come out from the tab.
5 When using the optional power amplifier,
connect to its power control terminal.
7 Depending on what antenna you are using,
connect either to the control terminal of the
motor antenna, or to the power terminal for
the booster amplifier of the film-type antenna.
Ignition key
switch
10
Car fuse box
(Main fuse)
11
+ -
Battery 12
2 KENWOOD disc changer control input
To connect the Disc changer,
consult your Disc changer
manual. 3
P. CONT Power control wire (Blue/White)
ANT CONT Motor antenna control wire (Blue)
ACC 13
Ignition wire (Red)
Battery wire (Yellow)
Car fuse
box 14
Ground wire (Black) · (To car chassis)
- 26 - - 26 -
Rear left output (White)
Fuse (10A)
24
Wiring harness
4a
(Accessory1)
25
29
15
White/Black
17
35
Green/Black
38
Purple/Black
20
21
22
26
Rear right output (Red) 27
REAR
L
FM/AM antenna input 1
R
To front left
speaker 30
White
31
32
Gray/Black
To front right
speaker 33
Gray
34
To rear left
speaker 36
Green
37
To rear right
speaker 39
Purple
40