Related Manuals for Kenwood KDC-MP3036
Summary of Contents for Kenwood KDC-MP3036
- Page 1 CD-RECEIVER KDC-MP4036AX KDC-MP3036AX KDC-MP336AX KDC-MP3036 KDC-MP336 INSTRUCTION MANUAL © B64-3494-00/00 (MW)
-
Page 2: Table Of Contents
Contents Safety precautions Notes General features Power Selecting the Source Volume Attenuator Audio Control Audio Setup Bass Boost Speaker Setting Switching Display Subwoofer Output Theft Deterrent Faceplate TEL Mute Tuner features Tuning Tuning Mode Station Preset Memory Auto Memory Entry Preset Tuning Frequency Step Setting CD/Audio file/External disc control... -
Page 3: Safety Precautions
Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. -
Page 4: Notes
• If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • The characters which can be displayed by this unit are A-Z 0-9 @ "... - Page 5 : Audio fi Audio file An online manual about audio files is put on the site, www.kenwood.com/audiofile/. On this online manual, detailed information and notes which are not written in this manual are provided. Make sure to read through the online manual as well.
-
Page 6: General Features
General features Release button ATT indicator Power Turning ON the Power Press the [SRC] button. ⁄ • When the power is ON, the <Security Code> (page 16) is displayed as "CODE ON" or "CODE OFF". (Function of KDC-MP4036AX) Turning OFF the Power Press the [SRC] button for at least 1 second. -
Page 7: Audio Control
Each time you press the button, the Attenuator turns ON and OFF. When the Attenuator is ON, the "ATT" indicator blinks. Audio Control Select the source to adjust Press the [SRC] button. Enter Audio Control mode Press the [VOL] knob. Select the Audio item to adjust Press the [VOL] knob. -
Page 8: Speaker Setting
General features Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. Enter Standby Press the [SRC] button. Select the "STANDBY" display. Enter Speaker Setting mode Press the [VOL] knob. Select the Speaker type Turn the [VOL] knob. -
Page 9: Theft Deterrent Faceplate
Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate Press the Release button. The faceplate unlocks, allowing you to detach it. ¤ • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. -
Page 10: Tuner Features
Tuner features Band display Tuning Selecting the station. Select tuner source Press the [SRC] button. Select the "TUNER" display. Select the band Push the Control knob towards [FM] or [AM]. Each time you push the knob toward [FM], it switches between the FM1, FM2, and FM3 bands. Tune up or down band Push the Control knob towards [4] or [¢]. -
Page 11: Station Preset Memory
Station Preset Memory Putting a station in the memory. Select the band Push the Control knob towards [FM] or [AM]. Select the frequency to put in the memory Push the Control knob towards [4] or [¢]. Put the frequency in the memory Press the desired [1] —... -
Page 12: Cd/Audio File/External Disc Control Features
CD/Audio file/External disc control features Playing CD & Audio file When a disc is inserted Press the [SRC] button. Select the "CD" display. ⁄ • When a CD is inserted, the "IN" indicator is ON. Pause and play Press the Control knob. Each time you press the knob, the audio pauses or plays. -
Page 13: Fast Forwarding And Reversing
Selecting the disc set in the Disc changer or the folder recorded on the Audio file media. Push the Control knob towards [FM] or [AM]. Accessory of KDC-MP4036AX/KDC-MP3036AX/ KDC-MP3036 Function of remote control Direct Track/File Search Doing Track/File Search by entering the track/file number. -
Page 14: Scan Play
CD/Audio file/External disc control features Scan Play Playing the first part of each song on the disc or Audio file folder you are listening to and searching for the song you want to hear. Start Scan Play Press the [SCAN] button. "TRAC SCN"/"FILE SCN"... -
Page 15: Menu System
Menu system Menu System Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. Enter Menu mode Press the [MENU] button for at least 1 second. "MENU"... -
Page 16: Security Code
Menu system Function of KDC-MP4036AX In Standby mode Security Code Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is required to turn on the audio unit when it is removed from the vehicle. -
Page 17: Manual Clock Adjustment
In Standby mode Manual Clock Adjustment Select Clock Adjustment mode Push the Control knob towards [FM] or [AM]. Select the "CLK ADJ" display. Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. Adjust the hours Push the Control knob towards [FM] or [AM]. -
Page 18: Auxiliary Input Display Setting
Menu system Function of KDC-MP4036AX/KDC-MP3036AX/ KDC-MP336AX Auxiliary Input Display Setting Selecting the display when alternating to Auxiliary input source. Select Auxiliary input source Press the [SRC] button. Select the "AUX"/"AUX EXT" display. Enter Menu mode Press the [MENU] button for at least 1 second. "MENU"... -
Page 19: Basic Operations Of Remote Control
Accessory of KDC-MP4036AX/KDC-MP3036AX/KDC-MP3036 Basic Operations of remote control – – FM/AM/ [0] — [9] KDC-MP4036AX Loading and Replacing the battery Use two "AA"/ "R6"-size batteries. Slide the cover while pressing downwards to remove it as illustrated. Insert the batteries with the + and – poles aligned properly, following the illustration inside the case. -
Page 20: In Tuner Source
Accessory of KDC-MP4036AX/KDC-MP3036AX/KDC-MP3036 Basic Operations of remote control Audio Control [AUD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item. ⁄ • Refer to <Audio Control> (page 7) for the operation method, such as the procedures for Audio control and others operations. -
Page 21: Accessories/Installation Procedure
Accessories/ Installation Procedure Accessories Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2. Make the proper input and output wire connections for each unit..1 3. Connect the speaker wires of the wiring harness. 4. -
Page 22: Connecting Wires To Terminals
Connecting Wires to Terminals To Kenwood disc changer/ External optional accessory (KDC-MP4036AX only) ⁄ To connect these leads, refer to the relevant instruction manuals. Fuse (10A) If no connections are made, do not let the wire come out from the tab. -
Page 23: Installation
Installation non-Japanese cars Metal mounting strap (commercially available) Firewall or metal support Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw (commercially available) Screw (M4X8) (commercially available) ⁄ • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). -
Page 24: Removing The Unit
Installation Removing the hard rubber frame Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure. Accessory2 Removal tool When the upper level is removed, remove the lower two locations. -
Page 25: Troubleshooting Guide
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. Cannot switch to Aux source. AUX is not turned on. ☞ <Built-in Auxiliary input Setting> (page 18) Cannot display the user of System Q. <Audio Control>... - Page 26 READING: The unit is reading the data on the disc. IN (Blink): The CD player section is not operating properly. ➪ Reinsert the CD. If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted, please switch off the power and consult your nearest service center.
-
Page 27: Specifications
: 531 kHz – 1611 kHz Frequency range (10 kHz space) : 530 kHz – 1700 kHz Usable sensitivity (S/N = 20dB) : 28 dBμ (25 μV) CD player section Laser diode : GaAlAs Digital filter (D/A) : 8 Times Over Sampling...