Kenwood KDC-D300 Instruction Manual page 14

Troubleshooting Guide
The following messages are displayed on the centre unit when certain problems are occurring in your system. Take
the recommended actions.
No CD in the unit.
E-01
]
Insert the CD.
EJECT
The faceplate of this unit has been removed.
NO PANEL
]
Replace it.
E-30
The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.
E-04
]
Clean the CD and load it correctly.
The unit is malfunctioning for some reason.
E-99
]
Press the reset button on the centre unit. If the "E- 99" code does not disappear, consult your nearest service centre.
The protective circuit in the unit activates when the temperature inside the CD player exceeds 60°C (140°F), stopping all operation.
E-0d
]
Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the
HOLD
disc will start playing again.
— 14 —