Broan Elite E64000 SERIES Installation Instructions Manual page 10

7. HORIZONTAL DISCHARGE INSTALLATION
Slide the blower to disengage its flange from the retaining bracket.
Flip the blower and engage its flange in the
back wall retaining bracket.
Using a 5/16" socket and the screws previously
removed, secure the blower to the hood.
Plug the blower in.
NOTE FOR DUAL BLOWER HOOD ONLY: Cut off the plastic tie wrap on left motor cable.
8. INSTALL THE ADAPTER AND THE TRANSITION (IF NEED BE)
(INTERNAL BLOWER HOOD ONLY)
Using standard 3/8" screws provided, secure the
adapter to the top (or back) of the hood (2 screws
for a 3¼" x 10" adapter/damper and 4 screws for
a 4½" x 18½" adapter). Seal the adapter to the
hood using metal foil duct tape. For round ducting,
install an appropriate sized transition and seal
the joints with metal foil duct tape.
9. INSTALL ANKE60 RECIRCULATION KIT
Refer to the installation sheet included with the recirculation kit for details.
(INTERNAL BLOWER(S) ONLY) (CONT'D)
L
M
L
HD0271
HJ0013
(NON DUCTED INSTALLATION ONLY)
10
HD0270
S
EFT IDE
OUNTING
S
CREW
OCATION
HD0272
HE0085
R S
IGHT IDE
M
OUNTING
S
CREW
L
OCATION