Manual Clock Adjustment; Dsi (Disabled System Indicator); Switching Display Type - Kenwood KDC-5020 Instruction Manual

Menu system

Manual Clock Adjustment

This adjustment can be done when the <Synchronize Clock> (page
26) is set as OFF.
1
Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "CLK ADJ" display.
2
Enter Clock Adjust mode
Press the [4] or [¢] button for at least 1 second.
The clock display blinks.
3
Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [4] or [¢] button.
4
Exit Clock adjustment mode
Press the [MENU] button.
Synchronize Clock
Synchronizing the RDS station time data and this unit's clock.
Display
"SYNC ON"
"SYNC OFF"
It takes 3 to 4 minutes to synchronize the clock.

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the faceplate is
Function of the KDC-5020R
Setting
Synchronizes the time.
Adjust the time manually.
— 26 —
removed, warning potential thieves.
Display
"DSI ON"
"DSI OFF"
Function of the KDC-MPV7020/KDC-6020/KDC-5020R
Selectable Illumination
Selecting the button illumination color as green or red.
Display Setting
"KEY GRN" The illumination color is green.
"KEY RED" The illumination color is red.
Function of the KDC-5020/KDC-5020R
Switching Graphic Display
Setting the graphic part display ON/OFF.
Display Setting
"GRPH ON" The graphic part is displayed.
"GRPH OFF" The graphic part isn't displayed.
Function of the KDC-MPV7020/KDC-6020

Switching Display Type

Setting the Display type.
Display Setting
"DisplayD" Demonstration.
"DisplayA" Circle Display is play time.
Setting
LED flashes.
LED OFF.