Menu System - Kenwood KDC-228 Instruction Manual

Menu system

ATT
DIM
Menu System
Setting during operation beep sound etc.
functions.
The Menu system basic operation method is
explained here. The reference for the Menu items
and their setting content is after this operation
explanation.
1
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
2
Select the menu item
Push the Control knob to [FM] or [AM].
Example: When you want to set the beep sound
select the "BEEP" display.
3
Set the menu item
Push the Control knob to [4] or [¢].
Example: When "BEEP" is selected, each time the
knob is pushed it switches "BEEP ON"
or "BEEP OFF". Select 1 of them as the
setting.
You can continue by returning to step 2 and
setting other items.
18
|
English
VOL
AUD
SET UP
Q
MENU OFF SCAN
MENU SRC
Menu display
CS
DISP
RDM REP
4
Exit Menu mode
Press the [MENU] button.
• When other items that are applicable to the basic
operation method above are displayed, afterwards
their setting content chart is entered. (Normally the
uppermost setting in the chart is the original setting.)
Also, the explanation for items that aren't applicable
(<Manual Clock Adjustment> etc.) are entered step
by step.
SCRL
+
-
AUTO
AME
Control
knob