Basic Operation; General Functions; Tuner Functions - Kenwood eXcelon KDC-X492 Instruction Manual

Basic Operation

[AUTO] Release
Release
Control knob Control knob
[ ]

General functions

Power/Source Select button
Turns on the power.
When the power is on, the source switches between
Tuner ("TUNER") , USB or iPod ("USB" or "iPod"),
CD ("CD") , Auxiliary input ("AUX"), and Standby
("STANDBY") each time this button is pressed.
Press at least 1 second to turn off the power.
⁄
• For whether USB devices and iPod can be connected, refer
to <About Audio file> (page 16).
• When an optional accessory is connected, the source name
for each device appears.
• When connection of the iPod is recognized, the source
display changes from "USB" to "iPod".
Volume control Control knob
Turn the knob to adjust the volume.
Faceplate release
Releases the faceplate lock so that it can be removed.
Refer to the following diagram when reattaching the
faceplate.
¤
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts.
• Keep the faceplate in its faceplate case while detached.
• Do not place the faceplate (and the faceplate case) in areas
exposed to direct sunlight, excessive heat or humidity. Also
4
|
KDC-X492/KDC-MP438U/KDC-MP408U/KDC-MP338
Display
[M.JOG]
Display Disc slot
[1] [2] [3] [4] [5] [6]
[SRC]
[SRC]
Release
Auxiliary input Auxiliary input
Disc slot
avoid places with too much dust or the possibility of water
splashing.
• To prevent deterioration, do not touch the terminals of the
unit or faceplate with your fingers.
Auxiliary input
Used to connect a portable audio device with mini-
plug cable (3.5 ø).
⁄
• Use the mini-plug cable (stereo) which does not have any
resistance.
Muting volume upon reception of phone call
When there is a call, "CALL" is displayed and the audio
system is paused.
When the call ends, "CALL" disappears and the audio
system comes back on.
The audio system comes back on when [SRC] is
pressed during a call.
Subwoofer output
Switches between ON ("SUBWOOFER ON") and OFF
("SUBWOOFER OFF") each time pushing toward down
for at least 2 seconds.

Tuner functions

Band select Control knob
Switches between FM1, FM2, and FM3 each time
pushing toward up.
Switches to AM when pushing toward down.
Tuning Control knob
Changes the frequency when pushing toward left or
right.
⁄
• During reception of stereo stations the "ST" indicator is ON.
[ ]
USB Terminal USB Terminal
Auxiliary input
Control knob