Installation - Kenwood K-CD01 Instruction Manual

Installation

non-Japanese cars
Metal mounting strap
(commercially available)
Firewall or metal support
Self-tapping screw
(commercially available)
Screw (M4X8)
(commercially available)
• When you install or remove the unit, hold the chassis (Metal part) to conduct the operation.
If you hold the control panel, it may cause damage.
Accessory5
Bend the tabs of the
mounting sleeve with a
screwdriver or similar utensil
and attach it in place.
Japanese cars
Align the holes in the unit (two locations on each
side) with the vehicle mounting bracket and
secure the unit with the accessory screws.
T
N
8 mm
MAX.
3
M5mm
Accessory3...for Nissan car
Accessory4 ...for Toyota car
• During installation, do not use any screws except for
those provided. The use of different screws might result
in damage to the main unit.
• Damage may occur if a screwdriver or similar tool is used
with excessive force during the installations.
N
T/N
T
T: Toyota cars
N: Nissan cars
8 mm
MAX.
4
M5mm
English
23
|