Tuner/Tv Control Features; Tuning; Direct Access Tuning - Kenwood K-CD01 Instruction Manual

Tuner/TV control features

CRSC
ST indicator

Tuning

Selecting the station.
1
Select tuner source
Press the [SRC] button.
Select the "Tuner" display.
2
Select the band
Press the [FM] or [AM] button.
Each time the [FM] button is pressed it switches
between the FM1, FM2, and FM3 bands.
3
Tune up or down band
Press the [ ] or [
• During reception of stereo stations the "ST" indicator
is ON.
1 – 6
Band display Frequency display
] button.
FNC
Preset station number
Function of remote

Direct Access Tuning

Entering the frequency and tuning.
1
Select the band
Press the [FM] or [AM] button.
2
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
"– – – –" is displayed.
3
Enter the frequency
Press the number buttons on the remote.
Example:
Desired frequency
92.1 MHz (FM)
810 kHz (AM)
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
SRC FM
AM
Press button
[0], [9], [2], [1]
[0], [8], [1], [0]
English
9
|