System Connections - Kenwood DPF-R3010 Instruction Manual

System connections

Caution:
4
Do not plug in the power lead until all connections are
completed.
Make connections as shown below.
When connecting the related system components, refer also
to the instruction manuals of the related components.
CD-206/DPF-R6010 :
AC110-220V
To wall AC outlet
CD-204/203/
DPF-R4010/R3010 :
AC 110-120V
To wall AC outlet
Connection to digital amplifier or MD (CD-206/DPF-R6010 only)
Connect the DIGITAL OUTPUT (OPTICAL or COAXIAL) jack to the digital input jack of the amplifier, DAT recorder, MD recorder,
etc., using an optical fiber cable or coaxial cable which are commercially available in audio stores.
÷ When using an optical fiber cable to connect this unit to a digital
amplifier, insert the plug straight into the jack until a snap sound is
heard.
÷ Be careful not to bend, coil, or bundle the optical fiber cable.
÷ Optical fiber cables available on the market may not always be able to
be used with this player. If your cord cannot be used with this unit,
consult the store from which you purchased the cord or your nearest
dealer.
1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging connection
Notes Notes
cords without removal of the power cord can cause malfunctions or damage to the unit.
5
SL 16/XS8 switch
LINE OUTPUT @
SYSTEM CONTROL DIGITAL OUTPUT
ƒ
VARI ABLE COAXIAL
L
SL16 XS 8
R
TEXT
AC220-240V
75 coaxial cable
with RCA PIN.
(Commercially-
available)
SYSTEM
CD
CONTROL
L
R
SYSTEM
LINE OUTPUT
CONTROL
2 3 AC 220-240V
L
SL16 XS 8
R
Malfunction of microcomputer
If operation is not possible or erroneous display appears even though
all connections have been made properly, reset themicrocomputer
referring to "In case of difficulty".
(COAXIAL)
DIGITAL INPUT
(OPTICAL)
OPTICAL
DIGITAL
INPUT
COAXIAL OPTICAL
System control cord
Audio cord
ƒ
5
SL 16/XS8 switch
CD-206/204/203/DPF-R6010/R4010/R3010 (En)
Digital component (MD, DAT, etc.)
Remove the protection cap when using the
DIGITAL OUTPUT (OPTICAL) jack
Commercially-available
optical fiber cable
Digital amplifier
(or ordinary amplifier, receiver, etc.)
Optical fiber cable
∞