To Clear Tracks From The Program - Kenwood DPF-R3010 Instruction Manual

Kenwood corporation cd player instruction manual cd/dpf-r series cd-206 cd-204 cd-203 dpf-r6010 dpf-r4010 dpf-r3010
Hide thumbs Also See for DPF-R3010:
Table of Contents

Advertisement

To clear tracks from the program

16
CD-206/DPF-R6010
REMOTE CONTROL UNIT
RC-P0601
CD-204/203/DPF-R4010/R3010
To program all tracks on a disc (CD-204/203/DPF-R4010/R3010 only)
1
2
3
Auto space function
During programming of tracks, a non-recorded space of a few
seconds will be automatically created between tracks. By record-
ing tracks with these spaces on tape, the search and repeat play
operations of tape using the DPSS function (which works by
searching the non-recorded spaces) can be performed reliably.
Time display on CD player (TIME DISP.)
Each press of the TIME DISP. (TIME DISPLAY) key changes
the displayed contents.
Press to clear tracks from the end.
CLEAR
CLEAR
To clear all tracks
P.MODE
Press so that the "PGM" indicator lights.
P.MODE
Select the desired disc.
DISC 1
DISC 2
DISC 3
DISC 4
Press the P. MODE key again.
P.MODE
Do this operation in the play mode.
TIME DISP.
÷ Each time the key is pressed, the last track in the program is cleared.
÷ The tracks which are programmed earlier than the track being played
cannot be cleared.
÷ Selected tracks can be also completely cleared just by operating the 0
key.
÷ The entire program is cleared.
DISC 5
÷ Even when the performances of two tracks are continuous (which
occurs with classical or live recording music), the spaces will be
created if they have different track Nos.
CD-206/DPF-R6010
1
1:23 : Elapsed time of track being played
2
-2:23 : Remaining time of track being played
3 23:45T : Elapsed time of entire disc (T lights up.)
4 -36:25T : Remaining time on entire disc (T lights up.)
CD-204/203/DPF-R4010/R3010
1
1:23 : Elapsed time of track being played (SINGLE lights up.)
2
-2:23 : Remaining time of track being played (SINGLE lights
3
23:45 : Elapsed time of entire disc (TOTAL lights up.)
4
-36:25 : Remaining time on entire disc (TOTAL lights up.)
÷ Only the display 1 and 2 will be displayed in PGM, RANDOM and EDIT
modes.
Programmed play (PGM mode)
CD-206/204/203/DPF-R6010/R4010/R3010 (En)
ALL indicator lights up.
1
2
3
4
ALL
6
7
8
9
P _ 0 1
up.)
5
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dpf-r6010Dpf-r4010Cd-203Cd-204Cd-206Dpf-r series ... Show all

Table of Contents