Canon EOS 70DN Basic Instruction Manual page 125

FlexiZone - Multi: o
You can focus over a wide area with up to 31 AF points (automatic
selection). This wide area can also be divided into 9 zones for focusing
(zone selection).
Area frame
1
Display the Live View image.
Press the <0> button.
The Live View image will appear on
the LCD monitor.
Select the AF point. N
2
Pressing <0> or the <L> button
will toggle between automatic
selection and zone selection. In Basic
Zone modes, automatic selection is
set automatically.
Use <9> to select the zone. To
return to the center zone, press
<0> or the <L> button again.
You can also tap the LCD monitor
screen to select a zone.
3
Focus the subject.
Aim the AF point over the subject and
press the shutter button halfway.
When focus is achieved, the AF point will
turn green and the beeper will sound.
If focus is not achieved, the area
frame will turn orange.
4
Take the picture.
Check the focus and exposure, then
press the shutter button completely to
take the picture (p.120).
Using AF to Focus (AF Method)
125