System Connections - Kenwood DPF-3030 Instruction Manual

System connections

Caution:
6
Do not plug in the power lead until all connections are com-
pleted.
Make connections as shown below.
When connecting the related system components, refer also to the
instruction manuals of the related components.
Caution
Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard.
÷ Do not place any objects impairing heat radiation onto the top of unit.
÷ Leave a space around the unit (from the largest outside dimension including projection)
equal or greater than, shown below.
Top panel : 50 cm
1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
Notes Notes
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
Side panel : 10 cm Back panel : 10 cm
DIGITAL OUTPUT jack
OUTPUT DIGITAL SYSTEM CONTROL
OUTPUT
OPTICAL
TEXT
L
R
Remove the
protection cap
when using the
DIGITAL OUTPUT
(OPTICAL) jack.
CD
Audio cord
Commercially-available
optical fiber cable
Malfunction of microcomputer
If operation is not possible or erroneous display appears even
though all connections have been made properly, reset the
microcomputer referring to "In case of difficulty".
Connection to KENWOOD MD recorder (CD TEXT):
The text (track titles) and the music of a CD can be copied to an MD.
For details, refer to the MD instruction manual.
SYSTEM
CONTROL
System control cord
L
R
Amplifier
DIGITAL
INPUT
OPTICAL
MD recorder / CD-R
To AC outlet
To wall AC outlet
To AC outlet
™