Install Mounting Brackets - K-Star K1007 SERIES Operating Instructions Manual

INSTALL MOUNTING
BRACKETS
After eveluating the height of the hood,
1.
place the hook center over installation
location. Drill 3 holes of Ø8mm on a
suitable place to fix the mounting
brackets.
Put the drywall anchors into the holes
2.
and fix the mounting screws (4x50mm)
into the anchors, and install the hook on
the wall as shown.
INSTALL SLIDERY DUCT
FIXING SUPPORT
1. Calculate the final height of the
U-shaped section, drill 2 holes of
Ø8mm on a suitable place in line with
the slidery duct fixing support.
2. Put the drywall anchors into the holes
and fix the mounting screws (4x50mm)
into the anchors, and install the hook
on the wall as shown. (The rest two
pares of 4x50mm screw and drywall
anchors are for spare)