Install Mounting Brackets - K-Star K1012 Operating Instructions Manual

INSTALL MOUNTING
BRACKETS
After eveluating the height of the hood,
1.
place the hook center over installation
location. Drill 3 holes of Ø8mm on a
suitable place to fix the mounting
brackets.
Put the drywall anchors into the holes
2.
and fix the mounting screws (4x50mm)
into the anchors, and install the hook
on the wall as shown.
INSTALL SL IDERY DUCT
F IXING SUPPORT
1 . Calculate the
U-shaped section, drill 2 holes of Ø8mm
on a suitable place in line with the
slidery duct fixing support.
2 . Put the drywall anchors into the holes
and fix the mounting screws (4x50mm)
into the anchors, and install the hook on
the wall as shown. (The rest two pares
of 4x50mm screw and drywall anchors
are for spare)
final height of the