None-Ducted Recirculation Filter Installation - K-Star K1007 SERIES Operating Instructions Manual

NONE-DUCTED
RECIRCULATION
FILTER INSTALLATION
Type-A
1. Purchase a
recirculation filter from your
dealer.
2. Install the filter by rotating it
onto the equipment which is
stands on two sides of the
motor.
Type-B
1. Purchase a non-ducted recirculation filter
from your dealer.
2. Press the handle of the metal grease filter
towards the rear part of the unit until it is
released from the front housing, and
remove it by pressing downwards.
3. To move the handle inside the cooker
hood. See Step 2. Remove the old carbon
filter away.
3. Place the new carbon filter on the suction
conduit, holding the filter by hand. Trun
the handle into one parallel. See Step 1
and Step 2 and step 3.
4. Reposition the anti-grease metallic filter
grilles.
non-ducted