Speaker Setting - Kenwood CD Receiver Instruction Manual

Adjustment Item Display
Bass level "Bas"
Middle level "Mid"
Treble level "Tre"
Balance "Bal"
Fader "Fad"
Volume offset "V-OFF"
Volume offset: Each source's volume can be set as a difference
from the basic volume.
5
Exit Audio Control mode
Press the [AUD] button.

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Speaker Setting mode
Press the [Q] button.
3
Select the Speaker type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
Range
–8 — +8
–8 — +8
–8 — +8
Left 15 — Right 15
Rear 15 — Front 15
4
–8 — ±0
— 11 —
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
Exit Speaker Setting mode
Press the [Q] button.
Display
"SP OFF"
"SP 5/4"
"SP 6*9/6"
"SP OEM"