Table of Contents
Advertisement
new static binding replaces the original one. To open this screen, click Advanced
Application > IP Source Guard > Static Binding.
Figure 131 IP Source Guard Static Binding
The following table describes the labels in this screen.
Table 82 IP Source Guard Static Binding
LABEL
MAC Address
IP Address
VLAN
Port
Add
Cancel
Clear
Index
MAC Address
IP Address
Lease
Type
VLAN
Port
MGS3700-12C User's Guide
DESCRIPTION
Enter the source MAC address in the binding.
Enter the IP address assigned to the MAC address in the binding.
Enter the source VLAN ID in the binding.
Specify the port(s) in the binding. If this binding has one port,
select the first radio button and enter the port number in the field
to the right. If this binding applies to all ports, select Any.
Click this to create the specified static binding or to update an
existing one.
Click this to reset the values above based on the last selected
static binding or, if not applicable, to clear the fields above.
Click this to clear the fields above.
This field displays a sequential number for each binding.
This field displays the source MAC address in the binding.
This field displays the IP address assigned to the MAC address in
the binding.
This field displays how long the binding is valid.
This field displays how the Switch learned the binding.
static: This binding was learned from information provided
manually by an administrator.
This field displays the source VLAN ID in the binding.
This field displays the port number in the binding. If this field is
blank, the binding applies to all ports.
Chapter 26 IP Source Guard
275
Advertisement
Table of Contents
Troubleshooting
