How To Find Out Which Code Is Currently Programmed; How To Switch Between Devices - Steren RM-20 User Manual

HOW TO FIND OUT WHICH CODE IS CURRENTLY
PROGRAMMED
Once you have set your remote control and control your device, you can
blink back your setup code for future reference, even if you used the
Automatic Search Method or the Quick Program Method.
In order to know a specific device code:
1.- On the remote control, press and hold a component key once (e.g.
TV, VCR, etc.). The red indicator light turns on. Then, press Help (?)
button, the red indicator light turns off.
2.- Release the buttons. To view the code for the first digit, press 1 once
and count the red light blinks. If a code digit is "0" the red light will not
blink.
3.- For the second digit, press 2 once and count the blinks.
4.- For the third digit, press 3 once and count the blinks.
5.- For the fourth digit, press 4 once and count the blinks and write the
number in quick reference table.

HOW TO SWITCH BETWEEN DEVICES

Just press the button of the desired device that you want to use (TV,
DVD, Aux, VCR, etc.). The function of the keys depending of the
selected component.
ENGLISH-10