Cd/External Disc Control Features Playing Cds - Kenwood DPX-6020 Instruction Manual

CD/External disc control features
CD EJECT
DISP
38 DISP/
SRC
NAME
indicator
Mode display/ Track
Disc number
number
4 ¢
SBF SCRL RDM D.SCN
REP M.RDM
SCN
SCN/D.SCN indicator
REP/D.REP indicator
RDM/M.RDM indicator
Track time
Playing CDs
DISC+
Play:
Press the CD EJECT button to slide open the front panel,
showing the CD (insertion) slot. Holding the CD with the
labeled side facing up, insert it in the slot. The front panel will
close, and the CD will start playing.
The indicator will light when a CD has been inserted.
Playing CDs Already Inserted:
Press the SRC button repeatedly to select the CD mode.
"CD" is displayed when the CD mode has been selected.
The CD will start playing.
Pausing and Restarting CD Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
Eject:
Press the CD EJECT button.
The front panel will slide to
eject the CD.
DISC-
Press the CD EJECT button to
close the front panel.
NOTE
When the CD cannot be ejected
even if you press the CD EJECT button, press this button for at
least three seconds to eject the CD.
2CAUTION
• Do not attempt to insert a CD into the slot if another one is
already there.
• The eject function will operate even if the CD EJECT button is
pressed while no CD is loaded. Attempting to quickly insert a
CD at this time may result in scratching the CD. Wait a short
time before inserting a CD.
• When the front panel has been slid, it might interfere with the
shift lever or something else. If this happens, pay attention to
safety and move the shift lever or take an appropriate action,
then operate the unit.
— 16 —