TROUBLESHOOTING/WIRING DIAGRAM
TROUBLESHOOTING
PROBLEM
Little or no solution flow
Loss of vacuum/Solution
recovery
WIRING DIAGRAM
Clarke
®
Operator's Manual - Image Mini Spot
CAUSE
Clogged spray jet on cleaning tool
Faulty pump
Incorrectly attached solution hose
Incorrectly attached vac hose
Obstruction in cleaning tool
Recovery tank is not securely
mounted on the solution tank
SOLUTION
Remove and clean jets
Check and replace pump.
(Call Tech. Service first)
Ensure solution hose coupler is securely
attached to the coupler on the solution tank.
Ensure vac hose is pushed completely onto
the recovery tank inlet.
Inspect for and remove any debris
Tighten latch on back end of the machine
Page 4-2