Print Set - Panasonic Lumix DMC-ZS3 Operating Instructions Manual

Using PLAYBACK menu
REC/PLAY switch:
Picture/picture no./date printing settings can be made for when printing with DPOF print-
compatible shops or printers. (Ask at shop to check compatibility)
For more information visit:
http://panasonic.jp/dc/dpof_110/white_e.htm
Set-up: Press 'MENU/SET'
Select 'SINGLE' or 'MULTI'
Select picture
SINGLE
Set number of pictures
(repeat steps
SINGLE
• Date print setting/release
• After confirmation, press
To release all
When using PictBridge-compatible printers, check settings on actual printer as these
may take priority over camera settings.
To print from built-in memory at a shop, first copy pictures to card (P.98) before making
settings.
DPOF print settings may not be made to non-DCF (P.40) files.
Some DPOF information set by other equipment cannot be used. In such cases, delete
all of the DPOF information and then set it again with this camera.
Date printing settings cannot be made for pictures with a 'TEXT STAMP' applied. These
settings will also be canceled if a 'TEXT STAMP' is applied later.
Motion pictures recorded in 'AVCHD Lite' format cannot be set.
96
VQT1Z82
(Set mode dial to any except

PRINT SET

' PLAYBACK menu'
and when using 'MULTI' (up to 999 pictures))
No. to print
Date print
set
to return to the menu screen.
Select 'CANCEL' in step
(Continued)
)
Select 'PRINT SET'
MULTI
MULTI
Press display button.
and select 'YES'.
No. to print
Date print set