Viera Link; Format; Language - Panasonic Lumix DMC-ZS3 Operating Instructions Manual

Using SETUP menu
Item

VIERA Link

Enable automatic linking
with other VIERA Link-
compatible devices,
and operability with a
VIERA remote control
when connecting via an
HDMI mini cable (sold
separately) (P.109).
VERSION DISP.
Check the version of the
camera firmware.

FORMAT

Use when 'BUILT-IN
MEMORY ERROR'
or 'MEMORY CARD
ERROR' appears, or
when formatting the built-
in memory or card.
When a card/built-in
memory is formatted,
the data cannot be
restored. Check the
content of the card/
built-in memory
carefully before
formatting.

LANGUAGE

Change display
language.
26
VQT1Z82
OFF: Operations must be performed via the camera's own
buttons.
ON: Operations may be performed via the remote control
of the VIERA Link-compatible device.
(Not all operations will be available.) Operability of
the camera's own buttons will be limited.
• Works when connected via an HDMI mini cable
(sold separately).
YES/NO
• This requires a sufficiently charged battery (P.13) or AC
adaptor (DMW-AC5PP, sold separately).
(Only inserted card will be formatted if present; built-in
memory will be formatted if no card is inserted.)
• Always format cards with this camera.
• All picture data including protected pictures will be
deleted. (P.97)
• Do not turn off power or perform other operations during
formatting.
• Consult your nearest Service Center if format cannot be
successfully completed.
• Formatting the built-in memory may take several minutes.
ENGLISH / DEUTSCH (German) / FRANÇAIS (French) /
ESPAÑOL (Spanish) / ITALIANO (Italian) /
(Japanese)
Not displayed on DMC-ZS3P/DMC-ZS1P.
The 'VIERA Link' menu item is not available in the DMC-ZS1.
(Continued)
Settings, notes
Current version is
displayed.
(Chinese) /