Rec Quality/ Continuous Af/ Wind Cut - Panasonic Lumix DMC-ZS3 Operating Instructions Manual

Using REC/MOTION PICTURE menu
(Continued)
REC/PLAY switch:
Sets the picture quality of the motion picture that is recorded.
MODE:
Settings:
'AVCHD Lite' in REC MODE
Setting
SH
H
L
'MOTION JPEG' in REC MODE
Setting
HD
WVGA
VGA
QVGA
1
The bit rate is the amount of data per unit time. A higher value translates into a higher image
quality. This camera uses the VBR (Variable Bit Rate) recording system and the available recording
time is shorter when recording a subject with rapid movements.
2
The frame rate is the number of frames per second.
'WVGA' cannot be set in INTELLIGENT AUTO Mode.
'QVGA' only can be recorded to the built-in memory.
Either allow the focus to be constantly adjusted during motion picture recording, or fix the
focus position at the start of recording.
MODE:
Settings: ON: Adjust focus according to movement of subject during motion
OFF: Fix focus position at the start of motion picture recording.
Reduces recording of wind sounds (wind noise) when recording in a strong wind
MODE:
Settings: OFF/ON (
When WIND CUT is set to 'ON', lower sounds will be eliminated and the sound quality
will differ from that of normal recordings.
80
VQT1Z82
REC QUALITY
REC menu
Resolution
1280 x 720
1280 x 720
1280 x 720
/
Resolution
1280 x 720
848 x 480
640 x 480
320 x 240
CONTINUOUS AF
MOTION PICTURE menu
REC menu
picture recording.
Use this setting to keep the same focus position for subjects with little
forward/backward movement.
WIND CUT
MOTION PICTURE menu
appears on the screen.)
WIND CUT is not available in the DMC-ZS1.
See P.18 for menu setting procedure.
MOTION PICTURE menu
Bit rate
17 Mbps
13 Mbps
9 Mbps
Frame rate
30 fps
30 fps
30 fps
30 fps
( appears on the screen.)
1
Aspect ratio
16:9
2
Aspect ratio
16:9
4:3