Table of Contents
Advertisement
Troubleshooting Guide
Some system functions are limited to control depending on your setup.
¶
Zone cannot be set.
¶
The "Rear Bass Boost" of SFC Adjust cannot be set.
¶
The rear speakers of DTA cannot be set.
¶
The "Position Fine Control" of rear speakers cannot be set.
¶
The "Channel Level" of rear speakers cannot be set.
¶
No SFC (Sound Field) can be set.
¶
No signals can be set.
¶
The "Parametric Equalizer" cannot be set.
¶
The "Position (Position Fine Control)" cannot be set.
¶
The "Car Type Setup" value cannot be set.
¶
The "Speaker Setup" value cannot be set.
¶
No crossover frequency can be set.
¶
The "Channel Level" (test signal output) cannot be set.
¶
The SFC (Sound Field) cannot be set to "Bypass+Center".
¶
The "Center Level" of SFC Adjust cannot be set.
¶
The "Center Width Control" of SFC Adjust cannot be set.
¶
The center speaker for DTA cannot be set.
¶
The "Position Fine Control" of the center speaker cannot be set.
¶
The "Channel Level" of the center speaker cannot be set.
¶
The SFC Adjust cannot be set.
¶
The SFC (Sound Field) cannot be set to "Dolby PL II".
¶
The subwoofer of DTA cannot be set.
¶
The "Position Fine Control" of the subwoofer cannot be set.
¶
The "Channel Level" of the subwoofer cannot be set.
The rear speakers have been set to
"NONE" on the Speaker Set Up
screen (page 62).
The Zone Control has been turned
On (page 94).
The center speaker has been set to
"NONE" on the Speaker Set Up
screen (page 62).
The SFC (Sound Field) (page 88) has
been set to "Bypass" or
"Bypass+Center".
The center and rear speakers have
been set to "NONE" on the Speaker
Set Up screen (page 62).
The subwoofer has been set to
"NONE" on the Speaker Set Up
screen (page 62).
English 107
Hide quick links:
Advertisement
Table of Contents
