28 II Ex
Getting Started
WX Warning
To prevent personal injury in mining
hazardous areas:
•
Avoid extreme mechanical burdens. The
Product can withstand impacts with an
energy of seven joules at -20 °C.
•
Do not allow the Product to come in
permanent contact with oils, hydraulic
fluid, or grease.
•
Do not install the Product in a fixed
installation.
WX Warning
To prevent possible electrical shock, fire, or
personal injury in ALL areas of operation:
•
Read all safety Information before you
use the Product.
•
Comply with local and national safety
codes. Use personal protective
equipment (approved rubber gloves, face
protection, and flame-resistant clothes)
to prevent shock and arc blast injury
where hazardous live conductors are
exposed
•
See the "EX Safety Information" section
for additional warnings on Product use
in hazardous areas.
4
MyFlukeStore
www.
Shop for Fluke products online at:
•
Use the Product only as specified, or the
protection supplied by the Product can
be compromised.
•
Do not use the Product in damp or wet
environments.
•
Do not exceed the Measurement
Category (CAT) rating of the lowest rated
individual component of a Product,
probe, or accessory.
•
Examine the case before you use the
Product. Look for cracks or missing
plastic. Carefully look at the insulation
around the terminals.
•
Do not use test leads if they are
damaged. Examine the test leads for
damaged insulation, exposed metal, or if
the wear indicator shows. Check test
lead continuity.
1.877.766.5412
.com