Clavia Nord Stage EX User Manual page 23

Nord Stage EX v6.x
N P
AMING A ROGRAM
To name a program, proceed as follows:
1. Hold down S
HIFT
blinking, and the D
2. Now use one of the following methods to name your Program:
• You can move the cursor position left or right in the D
• When the cursor is at the position where you want to enter/change a character, you can use the
V D to scroll through all available characters (a-z.A-Z, 0-9, Space and "-").
ALUE IAL
• By holding down S
position.
• By holding down S
sor position.
• Alternatively, you can press and hold down the KB Z
characters in the D
the V D to select a character at the current cursor position. When you release the KB
ALUE IAL
Z button the cursor automatically moves to the next position.
ONES
3. Press S again. Now you can use the same methods as outlined in "Storing a Program"
TORE
above to store your name with the Program.
and press the S A
TORE S
will read "Set Name".
ISPLAY
and pressing the I
HIFT NS
and pressing the D
HIFT EL
with the focus on the character the cursor was last on. You can now use
ISPLAY
5. The Program section: Storing Programs
... button once. The S
TORE
by using the P
ISPLAY
(P +) button, you enter a blank step at the cursor
AGE
(P -) button, you erase the character at the cur-
AGE
2 3 button. This will bring up the
ONES OR
button indicator starts
-/+ buttons.
AGE
Page 21