Clavia Nord Stage EX User Manual page 56

7. The Effects: The Panel effects
A
MP MODEL
You select a type of amplifier/speaker simulation using the S
tion. There are three types available, with different characteristics:
If all LEDs are off, the effect combines EQ with overdrive (no amp/speaker modelling).
G
LOBAL EFFECTS
If activated, the Compressor and Reverb effects will process all signals routed to
the CH 1/CH 2 outputs, but do not affect any signals routed to the CH 3/CH 4 out-
puts. Both these effects are stereo in/out.
C
OMPRESSOR
The Compressor will even out the dynamics of what you play, making low level
sounds louder and high level sounds lower. This produces a tight, punchy sound
and makes the overall level easier to control in a live mix situation. You activate
the Compressor using the O
compression applied.
R
EVERB
The Reverb section simulates the natural sound reflections in various acoustic en-
vironments. You can choose between five reverb types, indicated by the three
LEDs lit one or two at a time
Reverb name
Hall soft
Hall 2
Stage soft
Stage 2
Room
The D /W knob sets the balance between the unprocessed and the processed signal.
RY ET
Page 54
Amp Model
Amp 3 A simulation of a Roland Jazz Chorus
speaker cabinet, powered by a tube amp.
Amp 2 A simulation of the Wurlitzer 200A internal
speaker, powered by a tube amp.
Amp 1 A simulation of a Fender Twin tube ampli-
fier and speaker cabinet.
button. The A
N MOUNT
:
Description
A reverb with the response and character
of a spacious hall, with long decay and a
mellow character.
A hall reverb with a slightly brighter char-
acter
A reverb with a medium decay time and
mellow character.
A medium decay reverb, with slightly
brighter character.
Room ambiance with a rather short decay
time.
button in the Amp Model sec-
ELECTOR
Description
knob controls the amount of
Nord Stage EX v6.x